Limac Sign-making Router Bits  List
Short edge long shank end mill
MODEL	CED	D	CEL	L	SHK	OVL
ALDX0103	1	0.9	3	12	3.175	40
ALDX1.505	1.5	1.4	4	15	3.175	40
ALDX206	2	1.8	5	22	3.175	60
ALDX2.507	2.5	2.3	6	22	3.175	60
ALDX3.08	3.175	2.98	8	30	3.175	60
ALDX411	4	3.8	11	50	4	100
ALDX512	5	4.8	12	55	6	100
ALDX613	6	5.8	13	60	6	100
Two flute long shank tungsten steel ball end mills
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AA2QX02L	2	5	4	100
AA2QX025L	2.5	6	4	100
AA2QX03L	3	8	4	100
AA2QX04L	4	10	4	100
AA2QX05L	5	13	6	100
AA2QX06L	6	15	6	100
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A2QX02L	2	5	4	100
A2QX025L	2.5	6	4	100
A2QX03L	3	8	4	100
A2QX04L	4	10	4	100
A2QX05L	5	13	6	100
A2QX06L	6	15	6	100
A2QX08L	8	20	8	100
A2QX10L	10	25	10	100
A2QX12L	12	30	12	150
A2QX16L	16	40	16	150
A2QX20L	20	60	20	150
A2QX16LL	16	40	16	200
A2QX20LL	20	60	20	200
Two Flute Tungsten steel end mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AA2QX41. 03	1	3	4	50
AA2QX41.504	1.5	4	4	50
AA2QX4206	2	6	4	50
AA2QX42.508	2.5	8	4	50
AA2QX4308	3	8	4	50
AA2QX43510	3.5	10	4	50
AA2QX412	4	12	4	50
AA2QX6513	5	13	6	55
AA2QX614	6	14	6	60
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A2QX41. 03	1	3	4	50
A2QX41.504	1.5	4	4	50
A2QX4206	2	6	4	50
A2QX42.508	2.5	8	4	50
A2QX4308	3	8	4	50
A2QX43510	3.5	10	4	50
A2QX412	4	12	4	50
A2QX6513	5	13	6	55
A2QX614	6	14	6	60
A2QX820	8	19	6	60
A2QX1025	10	25	10	75
A2QX1230	12	30	12	75
A2QX1640	16	40	16	100
A2QX2040	20	40	20	100
Four flute tungsten steel end mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AA4LX02	2	5	4	50
AA4LX03	3	8	4	50
AA4LX04	4	11	4	50
AA4LX05	5	13	6	50
AA4LX06	6	15	6	50
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A4LX02	2	5	4	50
A4LX03	3	8	4	50
A4LX04	4	11	4	50
A4LX05	5	13	6	50
A4LX06	6	15	6	50
A4LX08	8	20	8	60
A4LX10	10	25	10	75
A4LX12	12	30	12	75
A4LX16	16	40	16	100
A4LX20	20	40	20	100
Four flute long shank tungsten steel end mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AA4LX02L	2	5	4	100
AA4LX025L	2.5	6	4	100
AA4LX03L	3	8	4	100
AA4LX04L	4	10	4	100
AA4LX05L	5	13	6	100
AA4LX06L	6	15	6	100
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A4LX02L	2	5	4	100
A4LX025L	2.5	6	4	100
A4LX03L	3	8	4	100
A4LX04L	4	10	4	100
A4LX05L	5	13	6	100
A4LX06L	6	15	6	100
A4LX08L	8	20	8	100
A4LX10L	10	25	10	100
A4LX12L	12	30	12	150
A4LX16L	16	40	16	150
A4LX20L	20	40	20	150
A4LX16LL	16	40	16	200
A4LX20LL	20	40	20	200
Two flute bit for aluminum
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AAL2LX4205	2	5	4	50
AAL2LX42.506	2.5	6	4	50
AAL2LX4308	3	8	4	50
AAL2LX410	4	10	4	50
AAL2LX6511	5	11	6	50
AAL2LX612	6	12	6	50
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
AL2LX4205	2	5	4	50
AL2LX42.506	2.5	6	4	50
AL2LX4308	3	8	4	50
AL2LX410	4	10	4	50
AL2LX6511	5	11	6	50
AL2LX612	6	12	6	50
AL2LX820	8	20	8	60
AL2LX1025	10	25	10	60
AL2LX1230	12	30	12	75
AL2LX1640	16	40	16	100
AL2LX2040	20	40	20	100
Six flute tungsten straight mill
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A6LX06L	6	25	6	100
A6LX08L	8	35	8	100
A6LX10L	10	40	10	100
A6LX12L	12	45	12	100
A6LX16L	16	45	16	150
A6LX20L	20	45	20	150
Two flute round angle tungsten steel straight mill
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	R	SHK	OVL
AYLX6R0.5	6	20	0.5	6	50
AYLX6R1	6	20	1	6	50
AYLX8R0.5	8	25	0.5	8	60
AYLX8R1	8	25	1	8	60
AYLX8R1.5	8	25	1.5	8	60
AYLX8R2	8	25	2	8	60
AYLX10R0.5	10	30	0.5	10	75
AYLX10R1	10	30	1	10	75
MODEL	CED	CEL	R	SHK	OVL
AYLX10R1.5	10	30	1.5	10	75
AYLX10R2	10	30	2	10	75
AYLX12R0.5	12	30	0.5	12	100
AYLX12R1	12	30	1	12	100
AYLX12R1.5	12	30	1.5	12	100
AYLX12R2	12	30	2	12	100
Two flute long shank tungsten steel straight mill
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	R	SHK	OVL
AYLX6R0.5	6	20	0.5	6	50
AYLX6R1	6	20	1	6	50
AYLX8R0.5	8	25	0.5	8	60
AYLX8R1	8	25	1	8	60
AYLX8R1.5	8	25	1.5	8	60
AYLX8R2	8	25	2	8	60
AYLX10R0.5	10	30	0.5	10	75
AYLX10R1	10	30	1	10	75
MODEL	CED	CEL	R	SHK	OVL
AYLX10R1.5	10	30	1.5	10	75
AYLX10R2	10	30	2	10	75
AYLX12R0.5	12	30	0.5	12	100
AYLX12R1	12	30	1	12	100
AYLX12R1.5	12	30	1.5	12	100
AYLX12R2	12	30	2	12	100
Two flute tungsten steel straight mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AA2LX01	1	3	4	50
AA2LX015	1.5	4	4	50
AA2LX02	2	5	4	50
AA2LX025	2.5	6	4	50
AA2LX03	3	8	4	50
AA2LX04	4	11	4	50
AA2LX05	5	13	6	50
AA2LX06	6	14	6	50
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A2LX01	1	3	4	50
A2LX015	1.5	4	4	50
A2LX02	2	5	4	50
A2LX025	2.5	6	4	50
A2LX03	3	8	4	50
A2LX04	4	11	4	50
A2LX05	5	13	6	50
A2LX06	6	14	6	50
A2LX08	8	20	8	60
A2LX10	10	25	10	75
A2LX12	12	30	12	75
A2LX16	16	40	16	100
A2LX20	20	40	20	100
Two flute straight mill
YN type is made of YG6X hard alloy, suitable for acryl, PVC, plastics, etc.
MODEL	CED	CEL	SHK	OVL
YN2LX3.205	2	5	3.175	40
YN2LX3.208	2	8	3.175	40
YN2LX3.210	2	10	3.175	40
YN2LX3.212	2	12	3.175	40
YN2LX3.2.510	2.5	10	3.175	40
YN2LX3.2.512	2.5	12	3.175	40
YN2LX3.2.515	2.5	15	3.175	45
YN2LX3.08	3.175	8	3.175	40
YN2LX3.10	3.175	10	3.175	40
YN2LX3.12	3.175	12	3.175	40
YN2LX3.15	3.175	15	3.175	40
YN2LX3.17	3.175	17	3.175	45
YN2LX3.20	3.175	20	3.175	50
YN2LX3.22	3.175	22	3.175	50
YN2LX412	4	12	4	40
YN2LX415	4	15	4	40
YN2LX417	4	17	4	50
YN2LX422	4	22	4	50
YN2LX425	4	25	4	50
YN2LX428	4	28	4	55
YN2LX432	4	32	4	60
YN2LX617	6	17	6	50
YN2LX622	6	22	6	50
YN2LX625	6	25	6	50
YN2LX628	6	28	6	55
YN2LX632	6	32	6	60
YN2LX642	6	42	6	70
YN2LX652	6	52	6	80
YN2LX672	6	72	6	120
Two flute gold-coated mill
GN type is made of YG6X hard alloy, suitable for MDF and acryl.
MODEL	CED	CEL	SHK	OVL
GN2LX3.205	2	5	3.175	40
GN2LX3.208	2	8	3.175	40
GN2LX3.210	2	10	3.175	40
GN2LX3.212	2	12	3.175	40
GN2LX3.2.510	2.5	10	3.175	40
GN2LX3.2.512	2.5	12	3.175	40
GN2LX3.2.515	2.5	15	3.175	45
GN2LX3.08	3.175	8	3.175	40
GN2LX3.10	3.175	10	3.175	40
GN2LX3.12	3.175	12	3.175	40
GN2LX3.15	3.175	15	3.175	40
GN2LX3.17	3.175	17	3.175	45
GN2LX3.20	3.175	20	3.175	50
GN2LX3.22	3.175	22	3.175	50
GN2LX412	4	12	4	40
GN2LX415	4	15	4	40
GN2LX417	4	17	4	50
GN2LX422	4	22	4	50
GN2LX425	4	25	4	50
GN2LX428	4	28	4	55
GN2LX432	4	32	4	60
GN2LX617	6	17	6	50
GN2LX622	6	22	6	50
GN2LX625	6	25	6	50
GN2LX628	6	28	6	55
GN2LX632	6	32	6	60
GN2LX642	6	42	6	70
GN2LX652	6	52	6	80
GN2LX672	6	72	6	120
Single flute mill
YN type is made of YG6X hard alloy imported. Suitable for acryl, PVC and plastics.
MODEL	CED	CEL	SHK	OVL
YN1LX3.104	1	4	3.175	40
YN1LX3.1.506	1.5	6	3.175	40
YN1LX3.205	2	5	3.175	40
YN1LX3.208	2	8	3.175	40
YN1LX3.210	2	10	3.175	40
YN1LX3.212	2	12	3.175	40
YN1LX3.215	2	15	3.175	40
YN1LX3.217	2	17	3.175	45
YN1LX3.2.510	2.5	10	3.175	40
YN1LX3.2.512	2.5	12	3.175	40
YN1LX3.2.515	2.5	15	3.175	45
YN1LX3.2.517	2.5	17	3.175	45
YN1LX3.2.522	2.5	22	3.175	45
YN1LX3.08	3.175	8	3.175	40
YN1LX3.10	3.175	10	3.175	40
YN1LX3.12	3.175	12	3.175	40
YN1LX3.15	3.175	15	3.175	40
YN1LX3.17	3.175	17	3.175	45
YN1LX3.20	3.175	20	3.175	50
YN1LX3.22	3.175	22	3.175	50
YN1LX3.25	3.175	25	3.175	55
YN1LX3.28	3.175	28	3.175	55
YN1LX3.32	3.175	32	3.175	60
YN1LX3.42	3.175	42	3.175	70
YN1LX3.52	3.175	52	3.175	80
YN1LX412	4	12	4	40
YN1LX415	4	15	4	40
YN1LX417	4	17	4	50
YN1LX422	4	22	4	50
YN1LX425	4	25	4	50
YN1LX428	4	28	4	55
YN1LX432	4	32	4	60
YN1LX442	4	42	4	70
YN1LX452	4	52	4	80
YN1LX617	6	17	6	50
YN1LX622	6	22	6	50
YN1LX625	6	25	6	50
YN1LX628	6	28	6	55
YN1LX632	6	32	6	60
YN1LX642	6	42	6	70
YN1LX652	6	52	6	80
YN1LX672	6	72	6	120
YN1LX6312	3	12	6	50
YN1LX6417	4	17	6	50
YN1LX6522	5	22	6	60
Multi-stripe mill
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
AMDRX622	6	22	6	50
AMDRX825	8	25	8	60
AMDRX835	8	35	8	80
AMDRX1032	10	32	10	80
AMDRX1245	12	45	12	100
Single flute helix bits
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	2T	2A	SHK	OVL
AALJ3.3001	0.1	30	3.175	40
AALJ3.3002	0.2	30	3.175	40
AALJ3.3003	0.3	30	3.175	40
AALJ3.3005	0.5	30	3.175	40
AALJ3.3602	0.2	36	3.175	40
AALJ3.3603	0.3	36	3.175	40
AALJ3.3605	0.5	36	3.175	40
AALJ3.4002	0.2	40	3.175	40
AALJ3.4005	0.3	40	3.175	40
AALJ3.4502	0.2	45	3.175	40
AALJ3.4504	0.4	45	3.175	40
AALJ3.6002	0.2	60	3.175	40
AALJ3.6004	0.4	60	3.175	40
AALJ43001	0.1	30	4	50
AALJ43002	0.2	30	4	50
AALJ43003	0.3	30	4	50
AALJ43004	0.4	30	4	50
AALJ44502	0.2	45	4	50
AALJ44505	0.5	45	4	50
AALJ46002	0.2	60	4	50
AALJ46005	0.5	60	4	50
AALJ49002	0.2	90	4	50
AALJ64502	0.2	45	6	50
AALJ64505	0.5	45	6	50
AALJ66002	0.2	60	6	50
AALJ66005	0.5	60	6	50
AALJ69002	0.2	90	6	50
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	2T	2A	SHK	OVL
ALJ3.3001	0.1	30	3.175	38.5
ALJ3.3002	0.2	30	3.175	38.5
ALJ3.3003	0.3	30	3.175	38.5
ALJ3.3005	0.5	30	3.175	38.5
ALJ3.3602	0.2	36	3.175	38.5
ALJ3.3603	0.3	36	3.175	38.5
ALJ3.3605	0.5	36	3.175	38.5
ALJ3.4002	0.2	40	3.175	38.5
ALJ3.4005	0.3	40	3.175	38.5
ALJ3.4502	0.2	45	3.175	38.5
ALJ3.4504	0.4	45	3.175	38.5
ALJ3.6002	0.2	60	3.175	38.5
ALJ3.6004	0.4	60	3.175	38.5
ALJ43001	0.1	30	4	40
ALJ43002	0.2	30	4	40
ALJ43003	0.3	30	4	40
ALJ44502	0.2	45	4	40
ALJ44505	0.5	45	4	40
ALJ46002	0.2	60	4	40
ALJ46005	0.5	60	4	40
ALJ49002	0.2	90	4	40
ALJ64502	0.2	45	6	45
ALJ64505	0.5	45	6	45
ALJ66002	0.2	60	6	45
ALJ66005	0.5	60	6	45
ALJ69002	0.2	90	6	45
N type is made of K10 hard alloy, suitable for stainless steel, mold steel, aluminum, brass, hard alloy, etc.
	2T	2A	SHK	OVL
NLJ3.3001	0.1	30	3.175	33
NLJ3.3002	0.2	30	3.175	33
NLJ3.3003	0.3	30	3.175	33
NLJ3.3004	0.4	30	3.175	33
NLJ3.3005	0.5	30	3.175	33
NLJ3.3602	0.2	36	3.175	33
NLJ3.3603	0.3	36	3.175	33
NLJ3.3605	0.5	36	3.175	33
NLJ3.4002	0.2	40	3.175	33
NLJ3.4005	0.3	40	3.175	33
NLJ3.4502	0.2	45	3.175	33
NLJ3.4504	0.4	45	3.175	33
NLJ3.6002	0.2	60	3.175	33
NLJ3.6004	0.4	60	3.175	33
NLJ3.9002	0.2	90	3.175	33
NLJ3.9003	0.3	90	3.175	33
Two flut downcut helix mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AA2LXD3.12	3.175	12	3.175	40
AA2LXD3.15	3.175	15	3.175	40
AA2LXD417	4	17	4	50
AA2LXD422	4	22	4	50
AA2LXD617	6	17	6	50
AA2LXD622	6	22	6	55
AA2LXD625	6	25	6	60
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A2LXD3.12	3.175	12	3.175	40
A2LXD3.15	3.175	15	3.175	40
A2LXD417	4	17	4	50
A2LXD422	4	22	4	50
A2LXD617	6	17	6	50
A2LXD622	6	22	6	55
A2LXD625	6	25	6	60
A2LXD825	8	25	8	60
Composite flute mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL		CED	CEL	SHK	OVL
AA1FLX3.12		3.175	12	3.175	40
AA1FLX3.17		3.175	17	3.175	40
AA1FLX3.22		3.175	22	3.175	50
AA1FLX3.25		3.175	25	3.175	50
AA1FLX3.32		3.175	32	3.175	60
AA1FLX412		4	12	4	50
AA1FLX417		4	17	4	50
AA1FLX422		4	22	4	50
AA1FLX425		4	25	4	50
AA1FLX432		4	32	4	65
AA1FLX442		4	42	4	70
AA1FLX452		4	52	4	80
AA1FLX612		6	12	6	50
AA1FLX617		6	17	6	50
AA1FLX622		6	22	6	60
AA1FLX625		6	25	6	60
AA1FLX628		6	28	6	70
AA1FLX632		6	32	6	80
AA1FLX645		6	45	6	90
AA1FLX655		6	55	6	100
AA1FLX675		6	75	6	120
Material: A type is made of K200 ultra micro tungsten steel, can process PVC
MODEL		CED	CEL	SHK	OVL
A1FLX3.12		3.175	12	3.175	40
A1FLX3.17		3.175	17	3.175	40
A1FLX3.22		3.175	22	3.175	50
A1FLX3.25		3.175	25	3.175	50
A1FLX3.32		3.175	32	3.175	60
A1FLX412		4	12	4	50
A1FLX417		4	17	4	50
A1FLX422		4	22	4	50
A1FLX425		4	25	4	50
A1FLX432		4	32	4	65
A1FLX442		4	42	4	70
A1FLX452		4	52	4	80
A1FLX517		5	17	5	50
A1FLX522		5	22	5	60
A1FLX612		6	12	6	50
A1FLX617		6	17	6	50
A1FLX622		6	22	6	50
A1FLX625		6	25	6	60
A1FLX628		6	28	6	70
A1FLX632		6	32	6	70
A1FLX645		6	45	6	80
A1FLX655		6	55	6	90
A1FLX675		6	75	6	120
A1FLX825		8	25	8	60
A1FLX835		8	35	8	80
A1FLX845		8	45	8	90
A1FLX855		8	55	8	100
A1FLX875		8	75	8	120
A1FLX8100		8	100	8	150
3D Router Bits
PHOTO	MODEL	SHK	CED
	HBDA616	6	16
	HBDA626	6	26
	HBDA12.26	12.7	26
	HBDB616	6	16
	HBDB626	6	26
	HBDB12.26	12.7	26
	HBDC616	6	16
	HBDC626	6	26
	HBDC12.26	12.7	26
	HBDD616	6	16
	HBDD622	6	22
	HBDE612	6	12
	HBDE616	6	16
	HBDE622	6	22
	HBDE12.32	12.7	32
	MODEL	SHK	CED
	HBDF626	6	26
	HBDF12.34	12.7	34
1/4R	NRD610	6	10
	NRD616		16
	NRD624		24
	NRD632		32
	NRD12.24	12.7	24
	NRD12.32		32
	NRD12.45		45
	JZD610	6	10
	JZD616		16
	JZD624		24
	JZD12.24	12.7	24
	JZDB612	6	12
	JZDB616	6	16
	JZDB12.24	12.7	24
	YDD610	6	10
	YDD615		15
	YDD620		20
	YDD625		25
	YDD630		30
	YDD12.20	12.7	20
	YDD12.25		25
	YDD12.30		30
	YDD12.45		45
End Mill
MODEL	CED	CEL	SHK	OVL
QD3.8	8	10	3.175	40
QD610	10	10	6	55
QD616	16	12	6	55
QD622	22	15	6	55
QD630	30	15	6	55
QD12.22	22	20	12.7	55
QD12.32	32	25	12.7	55
QD12.45	45	30	12.7	60
Single Flute helix ball nose mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process acryl, PVC, Plastics, etc.
MODEL	CED	CEL	SHK	OVL
AA1LQX3.104	1	4	3.175	40
AA1LQX3.1.506	1.5	6	3.175	40
AA1LQX3.205	2	5	3.175	40
AA1LQX3.208	2	8	3.175	40
AA1LQX3.210	2	10	3.175	40
AA1LQX3.212	2	12	3.175	40
AA1LQX3.2.510	2.5	10	3.175	40
AA1LQX3.2.512	2.5	12	3.175	40
AA1LQX3.2.515	2.5	15	3.175	45
AA1LQX3.12	3.175	12	3.175	40
AA1LQX3.15	3.175	15	3.175	40
AA1LQX3.17	3.175	17	3.175	45
AA1LQX3.22	3.175	22	3.175	50
AA1LQX3.25	3.175	25	3.175	55
AA1LQX3.28	3.175	28	3.175	60
AA1LQX3.32	3.175	32	3.175	70
AA1LQX412	4	12	4	50
AA1LQX415	4	15	4	50
AA1LQX417	4	17	4	50
AA1LQX422	4	22	4	50
AA1LQX425	4	25	4	50
AA1LQX428	4	28	4	55
AA1LQX432	4	32	4	65
AA1LQX442	4	42	4	70
AA1LQX452	4	52	4	80
AA1LQX617	6	17	6	50
AA1LQX622	6	22	6	50
AA1LQX625	6	25	6	50
AA1LQX628	6	28	6	60
AA1LQX632	6	32	6	60
AA1LQX642	6	42	6	70
AA1LQX652	6	52	6	80
AA1LQX672	6	72	6	100
Material: A type is made of K200 ultra micro tungsten steel, can process acryl, PVC, Plastics.
MODEL	CED	CEL	SHK	OVL
A1LQX3.104	1	4	3.175	40
A1LQX3.1.506	1.5	6	3.175	40
A1LQX3.205	2	5	3.175	40
A1LQX3.208	2	8	3.175	40
A1LQX3.210	2	10	3.175	40
A1LQX3.212	2	12	3.175	40
A1LQX3.2.510	2.5	10	3.175	40
A1LQX3.2.512	2.5	12	3.175	40
A1LQX3.2.515	2.5	15	3.175	45
A1LQX3.12	3.175	12	3.175	40
A1LQX3.15	3.175	15	3.175	40
A1LQX3.17	3.175	17	3.175	45
A1LQX3.22	3.175	22	3.175	50
A1LQX3.25	3.175	25	3.175	50
A1LQX3.28	3.175	28	3.175	55
A1LQX3.32	3.175	32	3.175	60
A1LQX412	4	12	4	50
A1LQX415	4	15	4	50
A1LQX417	4	17	4	50
A1LQX422	4	22	4	50
A1LQX425	4	25	4	50
A1LQX428	4	28	4	55
A1LQX432	4	32	4	60
A1LQX442	4	42	4	70
A1LQX452	4	52	4	80
A1LQX617	6	17	6	50
A1LQX622	6	22	6	50
A1LQX625	6	25	6	50
A1LQX628	6	28	6	55
A1LQX632	6	32	6	60
A1LQX642	6	42	6	70
A1LQX652	6	52	6	80
A1LQX672	6	72	6	100
A1LQX825	8	25	8	60
A1LQX835	8	35	8	80
A1LQX845	8	45	8	100
A1LQX1025	10	25	10	60
A1LQX1035	10	35	10	70
A1LQX1045	10	45	10	80