High performance, low price
-    Provides 12/8 kinds of equal angle constant torque microstep selection，upmost microstep can be set to 200, which makes the motor runs smoothly, enhance resolution.
-    Special circuit design，reduce noise, enhance steadiness.
-    The upmost pulse response frequence amounts to 200Kpps
-    Once the pulse stops for 100ms，the phase current will automatically cut by half, which can reduce chances of overheat.
-    Bipolar constant current chopper control
-    Photocoupler isolated input/output
-    Adjustable drive current range from 0.5A/phase～6.0A/phase
-    Can drive any two phase hybrid step motor whose phase current under 6.0A
-    Single power input, voltage range from DC24-80V
-    Protection circuit
        ――Overheat protection
        ――Overcurrent & under voltage protection
-    Small in size

Carve machine、laser labeling machine，laser internal carve machine

limacA2608MG(H) is a constant torque high performance driver with microstep, voltage range from DC24-80V，single power input. It can match two phase hybrid step motors whose rated current under 6.0A、shaft diameter range from 57～86mm.
Owe to bipolar constant current chopper control of the driver circuit, the motor can run smoothly and hardly has any noise. Rising the voltage can greatly improve high speed performance and output torque of the motor. Once the pulse stops for 100ms，the phase current will automatically cut by half, which can reduce chances of overheat. Users can operate the driver with microstep in low speed occasion. The upmost microstep can be set to 200.