Limac Sign-making Router Bits  List
Short edge long shank end mill
MODEL	CED	D	CEL	L	SHK	OVL
ALDX0103	1	0.9	3	12	3.175	40
ALDX1.505	1.5	1.4	4	15	3.175	40
ALDX206	2	1.8	5	22	3.175	60
ALDX2.507	2.5	2.3	6	22	3.175	60
ALDX3.08	3.175	2.98	8	30	3.175	60
ALDX411	4	3.8	11	50	4	100
ALDX512	5	4.8	12	55	6	100
ALDX613	6	5.8	13	60	6	100
Two flute long shank tungsten steel ball end mills
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AA2QX02L	2	5	4	100
AA2QX025L	2.5	6	4	100
AA2QX03L	3	8	4	100
AA2QX04L	4	10	4	100
AA2QX05L	5	13	6	100
AA2QX06L	6	15	6	100
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A2QX02L	2	5	4	100
A2QX025L	2.5	6	4	100
A2QX03L	3	8	4	100
A2QX04L	4	10	4	100
A2QX05L	5	13	6	100
A2QX06L	6	15	6	100
A2QX08L	8	20	8	100
A2QX10L	10	25	10	100
A2QX12L	12	30	12	150
A2QX16L	16	40	16	150
A2QX20L	20	60	20	150
A2QX16LL	16	40	16	200
A2QX20LL	20	60	20	200
Two Flute Tungsten steel end mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AA2QX41. 03	1	3	4	50
AA2QX41.504	1.5	4	4	50
AA2QX4206	2	6	4	50
AA2QX42.508	2.5	8	4	50
AA2QX4308	3	8	4	50
AA2QX43510	3.5	10	4	50
AA2QX412	4	12	4	50
AA2QX6513	5	13	6	55
AA2QX614	6	14	6	60
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A2QX41. 03	1	3	4	50
A2QX41.504	1.5	4	4	50
A2QX4206	2	6	4	50
A2QX42.508	2.5	8	4	50
A2QX4308	3	8	4	50
A2QX43510	3.5	10	4	50
A2QX412	4	12	4	50
A2QX6513	5	13	6	55
A2QX614	6	14	6	60
A2QX820	8	19	6	60
A2QX1025	10	25	10	75
A2QX1230	12	30	12	75
A2QX1640	16	40	16	100
A2QX2040	20	40	20	100
Four flute tungsten steel end mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AA4LX02	2	5	4	50
AA4LX03	3	8	4	50
AA4LX04	4	11	4	50
AA4LX05	5	13	6	50
AA4LX06	6	15	6	50
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A4LX02	2	5	4	50
A4LX03	3	8	4	50
A4LX04	4	11	4	50
A4LX05	5	13	6	50
A4LX06	6	15	6	50
A4LX08	8	20	8	60
A4LX10	10	25	10	75
A4LX12	12	30	12	75
A4LX16	16	40	16	100
A4LX20	20	40	20	100
Four flute long shank tungsten steel end mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AA4LX02L	2	5	4	100
AA4LX025L	2.5	6	4	100
AA4LX03L	3	8	4	100
AA4LX04L	4	10	4	100
AA4LX05L	5	13	6	100
AA4LX06L	6	15	6	100
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A4LX02L	2	5	4	100
A4LX025L	2.5	6	4	100
A4LX03L	3	8	4	100
A4LX04L	4	10	4	100
A4LX05L	5	13	6	100
A4LX06L	6	15	6	100
A4LX08L	8	20	8	100
A4LX10L	10	25	10	100
A4LX12L	12	30	12	150
A4LX16L	16	40	16	150
A4LX20L	20	40	20	150
A4LX16LL	16	40	16	200
A4LX20LL	20	40	20	200
Two flute bit for aluminum
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AAL2LX4205	2	5	4	50
AAL2LX42.506	2.5	6	4	50
AAL2LX4308	3	8	4	50
AAL2LX410	4	10	4	50
AAL2LX6511	5	11	6	50
AAL2LX612	6	12	6	50
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
AL2LX4205	2	5	4	50
AL2LX42.506	2.5	6	4	50
AL2LX4308	3	8	4	50
AL2LX410	4	10	4	50
AL2LX6511	5	11	6	50
AL2LX612	6	12	6	50
AL2LX820	8	20	8	60
AL2LX1025	10	25	10	60
AL2LX1230	12	30	12	75
AL2LX1640	16	40	16	100
AL2LX2040	20	40	20	100
Six flute tungsten straight mill
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A6LX06L	6	25	6	100
A6LX08L	8	35	8	100
A6LX10L	10	40	10	100
A6LX12L	12	45	12	100
A6LX16L	16	45	16	150
A6LX20L	20	45	20	150
Two flute round angle tungsten steel straight mill
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	R	SHK	OVL
AYLX6R0.5	6	20	0.5	6	50
AYLX6R1	6	20	1	6	50
AYLX8R0.5	8	25	0.5	8	60
AYLX8R1	8	25	1	8	60
AYLX8R1.5	8	25	1.5	8	60
AYLX8R2	8	25	2	8	60
AYLX10R0.5	10	30	0.5	10	75
AYLX10R1	10	30	1	10	75
MODEL	CED	CEL	R	SHK	OVL
AYLX10R1.5	10	30	1.5	10	75
AYLX10R2	10	30	2	10	75
AYLX12R0.5	12	30	0.5	12	100
AYLX12R1	12	30	1	12	100
AYLX12R1.5	12	30	1.5	12	100
AYLX12R2	12	30	2	12	100
Two flute long shank tungsten steel straight mill
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	R	SHK	OVL
AYLX6R0.5	6	20	0.5	6	50
AYLX6R1	6	20	1	6	50
AYLX8R0.5	8	25	0.5	8	60
AYLX8R1	8	25	1	8	60
AYLX8R1.5	8	25	1.5	8	60
AYLX8R2	8	25	2	8	60
AYLX10R0.5	10	30	0.5	10	75
AYLX10R1	10	30	1	10	75
MODEL	CED	CEL	R	SHK	OVL
AYLX10R1.5	10	30	1.5	10	75
AYLX10R2	10	30	2	10	75
AYLX12R0.5	12	30	0.5	12	100
AYLX12R1	12	30	1	12	100
AYLX12R1.5	12	30	1.5	12	100
AYLX12R2	12	30	2	12	100
Two flute tungsten steel straight mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AA2LX01	1	3	4	50
AA2LX015	1.5	4	4	50
AA2LX02	2	5	4	50
AA2LX025	2.5	6	4	50
AA2LX03	3	8	4	50
AA2LX04	4	11	4	50
AA2LX05	5	13	6	50
AA2LX06	6	14	6	50
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A2LX01	1	3	4	50
A2LX015	1.5	4	4	50
A2LX02	2	5	4	50
A2LX025	2.5	6	4	50
A2LX03	3	8	4	50
A2LX04	4	11	4	50
A2LX05	5	13	6	50
A2LX06	6	14	6	50
A2LX08	8	20	8	60
A2LX10	10	25	10	75
A2LX12	12	30	12	75
A2LX16	16	40	16	100
A2LX20	20	40	20	100
Two flute straight mill
YN type is made of YG6X hard alloy, suitable for acryl, PVC, plastics, etc.
MODEL	CED	CEL	SHK	OVL
YN2LX3.205	2	5	3.175	40
YN2LX3.208	2	8	3.175	40
YN2LX3.210	2	10	3.175	40
YN2LX3.212	2	12	3.175	40
YN2LX3.2.510	2.5	10	3.175	40
YN2LX3.2.512	2.5	12	3.175	40
YN2LX3.2.515	2.5	15	3.175	45
YN2LX3.08	3.175	8	3.175	40
YN2LX3.10	3.175	10	3.175	40
YN2LX3.12	3.175	12	3.175	40
YN2LX3.15	3.175	15	3.175	40
YN2LX3.17	3.175	17	3.175	45
YN2LX3.20	3.175	20	3.175	50
YN2LX3.22	3.175	22	3.175	50
YN2LX412	4	12	4	40
YN2LX415	4	15	4	40
YN2LX417	4	17	4	50
YN2LX422	4	22	4	50
YN2LX425	4	25	4	50
YN2LX428	4	28	4	55
YN2LX432	4	32	4	60
YN2LX617	6	17	6	50
YN2LX622	6	22	6	50
YN2LX625	6	25	6	50
YN2LX628	6	28	6	55
YN2LX632	6	32	6	60
YN2LX642	6	42	6	70
YN2LX652	6	52	6	80
YN2LX672	6	72	6	120
Two flute gold-coated mill
GN type is made of YG6X hard alloy, suitable for MDF and acryl.
MODEL	CED	CEL	SHK	OVL
GN2LX3.205	2	5	3.175	40
GN2LX3.208	2	8	3.175	40
GN2LX3.210	2	10	3.175	40
GN2LX3.212	2	12	3.175	40
GN2LX3.2.510	2.5	10	3.175	40
GN2LX3.2.512	2.5	12	3.175	40
GN2LX3.2.515	2.5	15	3.175	45
GN2LX3.08	3.175	8	3.175	40
GN2LX3.10	3.175	10	3.175	40
GN2LX3.12	3.175	12	3.175	40
GN2LX3.15	3.175	15	3.175	40
GN2LX3.17	3.175	17	3.175	45
GN2LX3.20	3.175	20	3.175	50
GN2LX3.22	3.175	22	3.175	50
GN2LX412	4	12	4	40
GN2LX415	4	15	4	40
GN2LX417	4	17	4	50
GN2LX422	4	22	4	50
GN2LX425	4	25	4	50
GN2LX428	4	28	4	55
GN2LX432	4	32	4	60
GN2LX617	6	17	6	50
GN2LX622	6	22	6	50
GN2LX625	6	25	6	50
GN2LX628	6	28	6	55
GN2LX632	6	32	6	60
GN2LX642	6	42	6	70
GN2LX652	6	52	6	80
GN2LX672	6	72	6	120
Single flute mill
YN type is made of YG6X hard alloy imported. Suitable for acryl, PVC and plastics.
MODEL	CED	CEL	SHK	OVL
YN1LX3.104	1	4	3.175	40
YN1LX3.1.506	1.5	6	3.175	40
YN1LX3.205	2	5	3.175	40
YN1LX3.208	2	8	3.175	40
YN1LX3.210	2	10	3.175	40
YN1LX3.212	2	12	3.175	40
YN1LX3.215	2	15	3.175	40
YN1LX3.217	2	17	3.175	45
YN1LX3.2.510	2.5	10	3.175	40
YN1LX3.2.512	2.5	12	3.175	40
YN1LX3.2.515	2.5	15	3.175	45
YN1LX3.2.517	2.5	17	3.175	45
YN1LX3.2.522	2.5	22	3.175	45
YN1LX3.08	3.175	8	3.175	40
YN1LX3.10	3.175	10	3.175	40
YN1LX3.12	3.175	12	3.175	40
YN1LX3.15	3.175	15	3.175	40
YN1LX3.17	3.175	17	3.175	45
YN1LX3.20	3.175	20	3.175	50
YN1LX3.22	3.175	22	3.175	50
YN1LX3.25	3.175	25	3.175	55
YN1LX3.28	3.175	28	3.175	55
YN1LX3.32	3.175	32	3.175	60
YN1LX3.42	3.175	42	3.175	70
YN1LX3.52	3.175	52	3.175	80
YN1LX412	4	12	4	40
YN1LX415	4	15	4	40
YN1LX417	4	17	4	50
YN1LX422	4	22	4	50
YN1LX425	4	25	4	50
YN1LX428	4	28	4	55
YN1LX432	4	32	4	60
YN1LX442	4	42	4	70
YN1LX452	4	52	4	80
YN1LX617	6	17	6	50
YN1LX622	6	22	6	50
YN1LX625	6	25	6	50
YN1LX628	6	28	6	55
YN1LX632	6	32	6	60
YN1LX642	6	42	6	70
YN1LX652	6	52	6	80
YN1LX672	6	72	6	120
YN1LX6312	3	12	6	50
YN1LX6417	4	17	6	50
YN1LX6522	5	22	6	60
Multi-stripe mill
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
AMDRX622	6	22	6	50
AMDRX825	8	25	8	60
AMDRX835	8	35	8	80
AMDRX1032	10	32	10	80
AMDRX1245	12	45	12	100
Single flute helix bits
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	2T	2A	SHK	OVL
AALJ3.3001	0.1	30	3.175	40
AALJ3.3002	0.2	30	3.175	40
AALJ3.3003	0.3	30	3.175	40
AALJ3.3005	0.5	30	3.175	40
AALJ3.3602	0.2	36	3.175	40
AALJ3.3603	0.3	36	3.175	40
AALJ3.3605	0.5	36	3.175	40
AALJ3.4002	0.2	40	3.175	40
AALJ3.4005	0.3	40	3.175	40
AALJ3.4502	0.2	45	3.175	40
AALJ3.4504	0.4	45	3.175	40
AALJ3.6002	0.2	60	3.175	40
AALJ3.6004	0.4	60	3.175	40
AALJ43001	0.1	30	4	50
AALJ43002	0.2	30	4	50
AALJ43003	0.3	30	4	50
AALJ43004	0.4	30	4	50
AALJ44502	0.2	45	4	50
AALJ44505	0.5	45	4	50
AALJ46002	0.2	60	4	50
AALJ46005	0.5	60	4	50
AALJ49002	0.2	90	4	50
AALJ64502	0.2	45	6	50
AALJ64505	0.5	45	6	50
AALJ66002	0.2	60	6	50
AALJ66005	0.5	60	6	50
AALJ69002	0.2	90	6	50
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	2T	2A	SHK	OVL
ALJ3.3001	0.1	30	3.175	38.5
ALJ3.3002	0.2	30	3.175	38.5
ALJ3.3003	0.3	30	3.175	38.5
ALJ3.3005	0.5	30	3.175	38.5
ALJ3.3602	0.2	36	3.175	38.5
ALJ3.3603	0.3	36	3.175	38.5
ALJ3.3605	0.5	36	3.175	38.5
ALJ3.4002	0.2	40	3.175	38.5
ALJ3.4005	0.3	40	3.175	38.5
ALJ3.4502	0.2	45	3.175	38.5
ALJ3.4504	0.4	45	3.175	38.5
ALJ3.6002	0.2	60	3.175	38.5
ALJ3.6004	0.4	60	3.175	38.5
ALJ43001	0.1	30	4	40
ALJ43002	0.2	30	4	40
ALJ43003	0.3	30	4	40
ALJ44502	0.2	45	4	40
ALJ44505	0.5	45	4	40
ALJ46002	0.2	60	4	40
ALJ46005	0.5	60	4	40
ALJ49002	0.2	90	4	40
ALJ64502	0.2	45	6	45
ALJ64505	0.5	45	6	45
ALJ66002	0.2	60	6	45
ALJ66005	0.5	60	6	45
ALJ69002	0.2	90	6	45
N type is made of K10 hard alloy, suitable for stainless steel, mold steel, aluminum, brass, hard alloy, etc.
	2T	2A	SHK	OVL
NLJ3.3001	0.1	30	3.175	33
NLJ3.3002	0.2	30	3.175	33
NLJ3.3003	0.3	30	3.175	33
NLJ3.3004	0.4	30	3.175	33
NLJ3.3005	0.5	30	3.175	33
NLJ3.3602	0.2	36	3.175	33
NLJ3.3603	0.3	36	3.175	33
NLJ3.3605	0.5	36	3.175	33
NLJ3.4002	0.2	40	3.175	33
NLJ3.4005	0.3	40	3.175	33
NLJ3.4502	0.2	45	3.175	33
NLJ3.4504	0.4	45	3.175	33
NLJ3.6002	0.2	60	3.175	33
NLJ3.6004	0.4	60	3.175	33
NLJ3.9002	0.2	90	3.175	33
NLJ3.9003	0.3	90	3.175	33
Two flut downcut helix mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL	CED	CEL	SHK	OVL
AA2LXD3.12	3.175	12	3.175	40
AA2LXD3.15	3.175	15	3.175	40
AA2LXD417	4	17	4	50
AA2LXD422	4	22	4	50
AA2LXD617	6	17	6	50
AA2LXD622	6	22	6	55
AA2LXD625	6	25	6	60
Material: A type is made of K200 ultra micro tungsten steel, can process cast iron, mold steel, and all kinds of soft materials.
MODEL	CED	CEL	SHK	OVL
A2LXD3.12	3.175	12	3.175	40
A2LXD3.15	3.175	15	3.175	40
A2LXD417	4	17	4	50
A2LXD422	4	22	4	50
A2LXD617	6	17	6	50
A2LXD622	6	22	6	55
A2LXD625	6	25	6	60
A2LXD825	8	25	8	60
Composite flute mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process cast iron, mold steel and quenched steel.
MODEL		CED	CEL	SHK	OVL
AA1FLX3.12		3.175	12	3.175	40
AA1FLX3.17		3.175	17	3.175	40
AA1FLX3.22		3.175	22	3.175	50
AA1FLX3.25		3.175	25	3.175	50
AA1FLX3.32		3.175	32	3.175	60
AA1FLX412		4	12	4	50
AA1FLX417		4	17	4	50
AA1FLX422		4	22	4	50
AA1FLX425		4	25	4	50
AA1FLX432		4	32	4	65
AA1FLX442		4	42	4	70
AA1FLX452		4	52	4	80
AA1FLX612		6	12	6	50
AA1FLX617		6	17	6	50
AA1FLX622		6	22	6	60
AA1FLX625		6	25	6	60
AA1FLX628		6	28	6	70
AA1FLX632		6	32	6	80
AA1FLX645		6	45	6	90
AA1FLX655		6	55	6	100
AA1FLX675		6	75	6	120
Material: A type is made of K200 ultra micro tungsten steel, can process PVC
MODEL		CED	CEL	SHK	OVL
A1FLX3.12		3.175	12	3.175	40
A1FLX3.17		3.175	17	3.175	40
A1FLX3.22		3.175	22	3.175	50
A1FLX3.25		3.175	25	3.175	50
A1FLX3.32		3.175	32	3.175	60
A1FLX412		4	12	4	50
A1FLX417		4	17	4	50
A1FLX422		4	22	4	50
A1FLX425		4	25	4	50
A1FLX432		4	32	4	65
A1FLX442		4	42	4	70
A1FLX452		4	52	4	80
A1FLX517		5	17	5	50
A1FLX522		5	22	5	60
A1FLX612		6	12	6	50
A1FLX617		6	17	6	50
A1FLX622		6	22	6	50
A1FLX625		6	25	6	60
A1FLX628		6	28	6	70
A1FLX632		6	32	6	70
A1FLX645		6	45	6	80
A1FLX655		6	55	6	90
A1FLX675		6	75	6	120
A1FLX825		8	25	8	60
A1FLX835		8	35	8	80
A1FLX845		8	45	8	90
A1FLX855		8	55	8	100
A1FLX875		8	75	8	120
A1FLX8100		8	100	8	150
3D Router Bits
PHOTO	MODEL	SHK	CED
	HBDA616	6	16
	HBDA626	6	26
	HBDA12.26	12.7	26
	HBDB616	6	16
	HBDB626	6	26
	HBDB12.26	12.7	26
	HBDC616	6	16
	HBDC626	6	26
	HBDC12.26	12.7	26
	HBDD616	6	16
	HBDD622	6	22
	HBDE612	6	12
	HBDE616	6	16
	HBDE622	6	22
	HBDE12.32	12.7	32
	MODEL	SHK	CED
	HBDF626	6	26
	HBDF12.34	12.7	34
1/4R	NRD610	6	10
	NRD616		16
	NRD624		24
	NRD632		32
	NRD12.24	12.7	24
	NRD12.32		32
	NRD12.45		45
	JZD610	6	10
	JZD616		16
	JZD624		24
	JZD12.24	12.7	24
	JZDB612	6	12
	JZDB616	6	16
	JZDB12.24	12.7	24
	YDD610	6	10
	YDD615		15
	YDD620		20
	YDD625		25
	YDD630		30
	YDD12.20	12.7	20
	YDD12.25		25
	YDD12.30		30
	YDD12.45		45
End Mill
MODEL	CED	CEL	SHK	OVL
QD3.8	8	10	3.175	40
QD610	10	10	6	55
QD616	16	12	6	55
QD622	22	15	6	55
QD630	30	15	6	55
QD12.22	22	20	12.7	55
QD12.32	32	25	12.7	55
QD12.45	45	30	12.7	60
Single Flute helix ball nose mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process acryl, PVC, Plastics, etc.
MODEL	CED	CEL	SHK	OVL
AA1LQX3.104	1	4	3.175	40
AA1LQX3.1.506	1.5	6	3.175	40
AA1LQX3.205	2	5	3.175	40
AA1LQX3.208	2	8	3.175	40
AA1LQX3.210	2	10	3.175	40
AA1LQX3.212	2	12	3.175	40
AA1LQX3.2.510	2.5	10	3.175	40
AA1LQX3.2.512	2.5	12	3.175	40
AA1LQX3.2.515	2.5	15	3.175	45
AA1LQX3.12	3.175	12	3.175	40
AA1LQX3.15	3.175	15	3.175	40
AA1LQX3.17	3.175	17	3.175	45
AA1LQX3.22	3.175	22	3.175	50
AA1LQX3.25	3.175	25	3.175	55
AA1LQX3.28	3.175	28	3.175	60
AA1LQX3.32	3.175	32	3.175	70
AA1LQX412	4	12	4	50
AA1LQX415	4	15	4	50
AA1LQX417	4	17	4	50
AA1LQX422	4	22	4	50
AA1LQX425	4	25	4	50
AA1LQX428	4	28	4	55
AA1LQX432	4	32	4	65
AA1LQX442	4	42	4	70
AA1LQX452	4	52	4	80
AA1LQX617	6	17	6	50
AA1LQX622	6	22	6	50
AA1LQX625	6	25	6	50
AA1LQX628	6	28	6	60
AA1LQX632	6	32	6	60
AA1LQX642	6	42	6	70
AA1LQX652	6	52	6	80
AA1LQX672	6	72	6	100
Material: A type is made of K200 ultra micro tungsten steel, can process acryl, PVC, Plastics.
MODEL	CED	CEL	SHK	OVL
A1LQX3.104	1	4	3.175	40
A1LQX3.1.506	1.5	6	3.175	40
A1LQX3.205	2	5	3.175	40
A1LQX3.208	2	8	3.175	40
A1LQX3.210	2	10	3.175	40
A1LQX3.212	2	12	3.175	40
A1LQX3.2.510	2.5	10	3.175	40
A1LQX3.2.512	2.5	12	3.175	40
A1LQX3.2.515	2.5	15	3.175	45
A1LQX3.12	3.175	12	3.175	40
A1LQX3.15	3.175	15	3.175	40
A1LQX3.17	3.175	17	3.175	45
A1LQX3.22	3.175	22	3.175	50
A1LQX3.25	3.175	25	3.175	50
A1LQX3.28	3.175	28	3.175	55
A1LQX3.32	3.175	32	3.175	60
A1LQX412	4	12	4	50
A1LQX415	4	15	4	50
A1LQX417	4	17	4	50
A1LQX422	4	22	4	50
A1LQX425	4	25	4	50
A1LQX428	4	28	4	55
A1LQX432	4	32	4	60
A1LQX442	4	42	4	70
A1LQX452	4	52	4	80
A1LQX617	6	17	6	50
A1LQX622	6	22	6	50
A1LQX625	6	25	6	50
A1LQX628	6	28	6	55
A1LQX632	6	32	6	60
A1LQX642	6	42	6	70
A1LQX652	6	52	6	80
A1LQX672	6	72	6	100
A1LQX825	8	25	8	60
A1LQX835	8	35	8	80
A1LQX845	8	45	8	100
A1LQX1025	10	25	10	60
A1LQX1035	10	35	10	70
A1LQX1045	10	45	10	80
A1LQX1055	10	55	10	100
Two flute ball nose mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process acryl, PVC, Plastics, etc.
MODEL	CED	CEL	SHK	OVL
AAM2QX412	4	12	4	50
AAM2QX417	4	17	4	50
AAM2QX422	4	22	4	50
AAM2QX425	4	25	4	50
AAM2QX428	4	28	4	60
AAM2QX432	4	32	4	70
AAM2QX622	6	22	6	50
MODEL	CED	CEL	SHK	OVL
AAM2QX625	6	25	6	55
AAM2QX628	6	28	6	60
AAM2QX632	6	32	6	70
AAM2QX642	6	42	6	80
AAM2QX652	6	52	6	100
AAM2QX672	6	72	6	120
Material: A type is made of K200 ultra micro tungsten steel, can process acryl, PVC, Plastics.
MODEL	CED	CEL	SHK	OVL
AM2QX412	4	12	4	50
AM2QX417	4	17	4	50
AM2QX422	4	22	4	50
AM2QX425	4	25	4	50
AM2QX428	4	28	4	60
AM2QX432	4	32	4	70
AM2QX622	6	22	6	50
AM2QX625	6	25	6	55
AM2QX628	6	28	6	60
AM2QX632	6	32	6	70
AM2QX642	6	42	6	80
AM2QX652	6	52	6	100
AM2QX672	6	72	6	120
NM type is made of K10 hard alloy, suitable acryl, PVC, MDF, hard wood, etc.
MODEL	CED	CEL	SHK	OVL
NM2QX412	4	12	4	40
NM2QX417	4	17	4	40
NM2QX422	4	22	4	45
NM2QX425	4	25	4	50
NM2QX428	4	28	4	60
NM2QX432	4	32	4	70
NM2QX622	6	22	6	50
NM2QX625	6	25	6	55
NM2QX628	6	28	6	60
NM2QX632	6	32	6	70
NM2QX642	6	42	6	80
NM2QX652	6	52	6	100
NM2QX672	6	72	6	120
NM2QX825	8	25	8	60
NM2QX835	8	35	8	70
NM2QX845	8	45	8	80
NM2QX1025	10	25	10	70
NM2QX1035	10	35	10	70
NM2QX1045	10	45	10	80
Two flute helix ball nose mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process acryl, PVC, MDF, Hard wood etc.
MODEL	CED	CEL	SHK	OVL
AA2QX3.104	1	4	3.175	40
AA2QX3.1.506	1.5	6	3.175	40
AA2QX3.208	2	8	3.175	40
AA2QX3.212	2	12	3.175	40
AA2QX3.2.512	2.5	12	3.175	40
AA2QX3.12	3.175	12	3.175	40
AA2QX3.17	3.175	17	3.175	40
AA2QX3.22	3.175	22	3.175	45
AA2QX417	4	17	4	50
AA2QX422	4	22	4	50
AA2QX425	4	25	4	50
AA2QX428	4	28	4	60
AA2QX432	4	32	4	70
AA2QX622	6	22	6	50
AA2QX625	6	25	6	55
AA2QX628	6	28	6	60
AA2QX632	6	32	6	70
AA2QX642	6	42	6	80
AA2QX652	6	52	6	100
AA2QX672	6	72	6	120
Material: A type is made of K200 ultra micro tungsten steel, can process acryl, PVC, Plastics.
MODEL	CED	CEL	SHK	OVL
A2QX3.104	1	4	3.175	40
A2QX3.1.506	1.5	6	3.175	40
A2QX3.208	2	8	3.175	40
A2QX3.212	2	12	3.175	40
A2QX3.2.512	2.5	12	3.175	40
A2QX3.12	3.175	12	3.175	40
A2QX3.17	3.175	17	3.175	40
A2QX3.22	3.175	22	3.175	45
A2QX417	4	17	4	50
A2QX422	4	22	4	50
A2QX425	4	25	4	50
A2QX428	4	28	4	60
A2QX432	4	32	4	70
A2QX622	6	22	6	50
A2QX625	6	25	6	55
A2QX628	6	28	6	60
A2QX632	6	32	6	70
A2QX642	6	42	6	80
A2QX652	6	52	6	100
A2QX672	6	72	6	120
N type is made of K10 hard alloy, suitable for acryl, PVC, MDF, hard wood, etc.
MODEL	CED	CEL	SHK	OVL
N2QX3.104	1	4	3.175	40
N2QX3.1.506	1.5	6	3.175	40
N2QX3.208	2	8	3.175	40
N2QX3.212	2	12	3.175	40
N2QX3.2.512	2.5	12	3.175	40
N2QX3.12	3.175	12	3.175	40
N2QX3.17	3.175	17	3.175	40
N2QX3.22	3.175	22	3.175	45
N2QX412	4	12	4	40
N2QX417	4	17	4	40
N2QX422	4	22	4	45
N2QX425	4	25	4	50
N2QX428	4	28	4	60
N2QX432	4	32	4	70
N2QX622	6	22	6	50
N2QX625	6	25	6	55
N2QX628	6	28	6	60
N2QX632	6	32	6	70
N2QX642	6	42	6	80
N2QX652	6	52	6	100
N2QX672	6	72	6	120
N2QX825	8	25	8	60
N2QX835	8	35	8	70
N2QX845	8	45	8	80
N2QX1025	10	25	10	70
N2QX1035	10	35	10	70
N2QX1045	10	45	10	80
Two flute straight ball nose mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process MDF, plywood, and other kinds of wood panels
MODEL	CED	CEL	SHK	OVL
AA2ZQX3.1.506	1.5	6	3.175	40
AA2ZQX3.208	2	8	3.175	40
AA2ZQX3.2.512	2.5	12	3.175	40
AA2ZQX3.08	3.175	8	3.175	40
AA2ZQX3.12	3.175	12	3.175	40
AA2ZQX3.17	3.175	17	3.175	40
AA2ZQX412	4	12	4	40
AA2ZQX417	4	17	4	40
AA2ZQX422	4	22	4	45
AA2ZQX425	4	25	4	50
AA2ZQX612	6	12	6	45
AA2ZQX617	6	17	6	50
AA2ZQX622	6	22	6	50
AA2ZQX625	6	25	6	55
Material: A type is made of K200 ultra micro tungsten steel, can process acryl, PVC, palstics.
MODEL	CED	CEL	SHK	OVL
A2ZQX3.1.506	1.5	6	3.175	40
A2ZQX3.208	2	8	3.175	40
A2ZQX3.2.512	2.5	12	3.175	40
A2ZQX3.12	3.175	12	3.175	40
A2ZQX3.17	3.175	17	3.175	40
A2ZQX412	4	12	4	40
A2ZQX417	4	17	4	40
A2ZQX422	4	22	4	45
A2ZQX425	4	25	4	50
A2ZQX622	6	22	6	50
A2ZQX625	6	25	6	55
N type is made of K10 hard alloy.
N2ZQX3.1.506	1.5	6	3.175	40
N2ZQX3.208	2	8	3.175	40
N2ZQX3.2.512	2.5	12	3.175	40
N2ZQX3.12	3.175	12	3.175	40
N2ZQX3.17	3.175	17	3.175	40
N2ZQX417	4	17	4	40
N2ZQX422	4	22	4	45
N2ZQX425	4	25	4	50
N2ZQX622	6	22	6	50
Toothed mill
Material: A type is made of K200 ultra micro tungsten steel, can process PCB, HDF, hard wood.
MODEL	CED	CEL	SHK	OVL
AST3.1.05	1	5	3.175	40
AST3.1.206	1.2	6	3.175	40
AST3.1.508	1.5	8	3.175	40
AST3.2.8	2	8	3.175	40
AST3.2.510	2.5	10	3.175	40
AST3.12	3.175	12	3.175	40
AST3.15	3.175	15	3.175	50
AST3.17	3.175	17	3.175	50
AST415	4	15	4	50
AST417	4	17	4	50
AST422	4	22	4	50
AST617	6	17	6	50
AST622	6	22	6	50
Composite flute mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process MDF, PVC, and plywood.
MODEL	CED	CEL	SHK	OVL
AAFLX308	3.175	8	3.175	50
AAFLX412	4	12	4	50
AAFLX417	4	17	4	50
AAFLX422	4	22	4	60
AAFLX612	6	12	6	50
AAFLX617	6	17	6	50
AAFLX622	6	22	6	60
AAFLX635	6	35	6	80
Material: A type is made of K200 ultra micro tungsten steel, can process PCB, HDF, hard wood.
MODEL	CED	CEL	SHK	OVL
AFLX3.08	3.175	8	3.175	40
AFLX412	4	12	4	50
AFLX417	4	17	4	50
AFLX517	5	17	5	50
AFLX522	5	22	5	50
AFLX612	6	12	6	50
AFLX617	6	17	6	50
AFLX622	6	22	6	60
AFLX635	6	35	6	80
AFLX825	8	25	8	60
AFLX835	8	35	8	80
AFLX1025	10	25	10	60
AFLX1035	10	35	10	80
AFLX1045	10	45	10	100
AFLX1235	12	35	12	75
AFLX1245	12	45	12	80
AFLX1255	12	55	12	120
Two flute straight mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process plywood, MDF, etc.
MODEL	CED	CEL	SHK	OVL
AA2ZX3.1.205	1.2	5	3.175	40
AA2ZX3.1.506	1.5	6	3.175	40
AA2ZX3.208	2	8	3.175	40
AA2ZX3.2.512	2.5	12	3.175	40
AA2ZX3.08	3.175	8	3.175	40
AA2ZX3.12	3.175	12	3.175	40
AA2ZX3.15	3.175	15	3.175	40
AA2ZX3.17	3.175	17	3.175	40
AA2ZX3.22	3.175	22	3.175	45
AA2ZX417	4	17	4	40
AA2ZX422	4	22	4	45
AA2ZX425	4	25	4	50
AA2ZX622	6	22	6	50
AA2ZX625	6	25	6	60
Material: A type is made of K200 ultra micro tungsten steel, can process plywood, MDF.
MODEL	CED	CEL	SHK	OVL
A2ZX3.1.205	1.2	5	3.175	38
A2ZX3.1.506	1.5	6	3.175	38
A2ZX3.208	2	8	3.175	38
A2ZX3.2.512	2.5	12	3.175	38
A2ZX3.08	3.175	8	3.175	38
A2ZX3.12	3.175	12	3.175	38
A2ZX3.15	3.175	15	3.175	38
A2ZX3.17	3.175	17	3.175	38
A2ZX3.22	3.175	22	3.175	45
A2ZX417	4	17	4	40
A2ZX422	4	22	4	45
A2ZX425	4	25	4	50
A2ZX617	6	17	6	50
A2ZX622	6	22	6	50
A2ZX625	6	25	6	60
N type is made of hard alloy, suitable for plywood, MDF, etc.
MODEL	CED	CEL	SHK	OVL
N2ZX3.12	3.175	12	3.175	40
N2ZX3.15	3.175	15	3.175	40
N2ZX3.17	3.175	17	3.175	40
N2ZX412	4	12	4	40
N2ZX417	4	17	4	40
N2ZX422	4	22	4	45
N2ZX425	4	25	4	50
N2ZX612	6	12	6	40
N2ZX617	6	17	6	45
N2ZX622	6	22	6	50
N2ZX625	6	25	6	60
N2ZX825	8	25	8	60
Three flute helix mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process plywood, MDF, etc.
MODEL	CED	CEL	SHK	OVL
AA3LX3.212	2	12	3.175	40
AA3LX3.12	3.175	12	3.175	40
AA3LX3.15	3.175	15	3.175	40
AA3LX3.17	3.175	17	3.175	40
AA3LX3.22	3.175	22	3.175	45
AA3LX3.25	3.175	25	3.175	50
AA3LX412	4	12	4	50
AA3LX417	4	17	4	50
AA3LX422	4	22	4	50
AA3LX425	4	25	4	50
AA3LX617	6	17	6	50
AA3LX622	6	22	6	50
AA3LX625	6	25	6	50
Material: A type is made of K200 ultra micro tungsten steel, can process plywood, MDF.
MODEL	CED	CEL	SHK	OVL
A3LX3.212	2	12	3.175	40
A3LX3.12	3.175	12	3.175	40
A3LX3.15	3.175	15	3.175	40
A3LX3.17	3.175	17	3.175	40
A3LX3.22	3.175	22	3.175	45
A3LX3.25	3.175	25	3.175	50
A3LX412	4	12	4	45
A3LX417	4	17	4	45
A3LX422	4	22	4	50
A3LX425	4	25	4	50
A3LX612	6	12	6	50
A3LX617	6	17	6	50
A3LX622	6	22	6	50
A3LX625	6	25	6	50
A3LX628	6	28	6	55
A3LX632	6	32	6	60
A3LX642	6	42	6	70
A3LX652	6	52	6	80
A3LX672	6	72	6	100
N type is made of K10 hard alloy, suitable for acryl, HDF, hard wood, etc.
MODEL	CED	CEL	SHK	OVL
N3LX3.12	3.175	12	3.175	40
N3LX3.15	3.175	15	3.175	40
N3LX3.17	3.175	17	3.175	40
N3LX3.22	3.175	22	3.175	40
N3LX3.25	3.175	25	3.175	40
N3LX417	4	17	4	40
N3LX422	4	22	4	45
N3LX425	4	25	4	50
N3LX617	6	17	6	45
N3LX622	6	22	6	50
N3LX625	6	25	6	50
N3LX628	6	28	6	55
N3LX632	6	32	6	60
N3LX642	6	42	6	70
N3LX652	6	52	6	80
N3LX672	6	72	6	100
N3LX825	8	25	8	60
N3LX835	8	35	8	80
N3LX845	8	45	8	80
N3LX855	8	55	8	100
Two flute helix end mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process plywood, MDF, etc.
MODEL	CED	CEL	SHK	OVL
AAM2LX412	4	12	4	50
AAM2LX417	4	17	4	50
AAM2LX422	4	22	4	50
AAM2LX425	4	25	4	50
AAM2LX432	4	32	4	60
AAM2LX442	4	42	4	70
AAM2LX452	4	52	4	80
AAM2LX617	6	17	6	50
AAM2LX622	6	22	6	50
AAM2LX625	6	25	6	50
AAM2LX628	6	28	6	50
AAM2LX632	6	32	6	65
AAM2LX642	6	42	6	70
AAM2LX652	6	52	6	80
AAM2LX672	6	72	6	100
Material: A type is made of K200 ultra micro tungsten steel, can process plywood, MDF.
MODEL	CED	CEL	SHK	OVL
AM2LX412	4	12	4	40
AM2LX417	4	17	4	40
AM2LX422	4	22	4	45
AM2LX425	4	25	4	50
AM2LX432	4	32	4	60
AM2LX442	4	42	4	70
AM2LX452	4	52	4	80
AM2LX617	6	17	6	50
AM2LX622	6	22	6	50
AM2LX625	6	25	6	50
AM2LX628	6	28	6	55
AM2LX632	6	32	6	60
AM2LX642	6	42	6	70
AM2LX652	6	52	6	80
AM2LX672	6	72	6	120
AM2LX825	8	25	8	60
AM2LX832	8	32	8	70
AM2LX842	8	42	8	80
AM2LX1025	10	25	10	75
AM2LX1035	10	35	10	80
AM2LX1045	10	45	10	100
N type is made of K10 hard alloy, suitable for MDF, PVC, acryl.
MODEL	CED	CEL	SHK	OVL
NM2LX412	4	12	4	40
NM2LX417	4	17	4	40
NM2LX422	4	22	4	45
NM2LX425	4	25	4	50
NM2LX428	4	28	4	50
NM2LX432	4	32	4	60
NM2LX442	4	42	4	70
NM2LX452	4	52	4	80
NM2LX517	5	17	5	50
NM2LX522	5	22	5	50
NM2LX6312	3	12	6	50
NM2LX6317	3	17	6	50
NM2LX6322	3	22	6	50
NM2LX6417	4	17	6	50
NM2LX6422	4	22	6	50
NM2LX6522	5	22	6	50
NM2LX612	6	12	6	50
NM2LX617	6	17	6	50
NM2LX622	6	22	6	50
NM2LX625	6	25	6	50
NM2LX628	6	28	6	55
NM2LX632	6	32	6	60
NM2LX642	6	42	6	70
NM2LX652	6	52	6	80
NM2LX672	6	72	6	100
NM2LX6.22	6.35	22	6.35	50
NM2LX825	8	25	8	55
NM2LX832	8	32	8	70
NM2LX842	8	42	8	80
NM2LX1025	10	25	10	60
NM2LX1035	10	35	10	80
NM2LX1045	10	45	10	100
Two flute helix mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process plywood, MDF, etc.
MODEL	CED	CEL	SHK	OVL
AA2LX3.104	1	4	3.175	40
AA2LX3.107	1	7	3.175	40
AA2LX3.1.507	1.5	7	3.175	40
AA2LX3.1.512	1.5	12	3.175	40
AA2LX3.208	2	8	3.175	40
AA2LX3.212	2	12	3.175	40
AA2LX3.217	2	17	3.175	45
AA2LX3.222	2	22	3.175	50
AA2LX3.2.512	2.5	15	3.175	40
AA2LX3.2.517	2.5	22	3.175	45
AA2LX3.2.522	2.5	22	3.175	50
AA2LX3.12	3.175	12	3.175	40
AA2LX3.15	3.175	15	3.175	40
AA2LX3.17	3.175	17	3.175	45
AA2LX3.22	3.175	22	3.175	50
AA2LX3.25	3.175	25	3.175	50
AA2LX412	4	12	4	50
AA2LX417	4	17	4	50
AA2LX422	4	22	4	50
AA2LX425	4	25	4	50
AA2LX432	4	32	4	60
AA2LX442	4	42	4	70
AA2LX452	4	52	4	80
AA2LX617	6	17	6	50
AA2LX622	6	22	6	50
AA2LX625	6	25	6	50
AA2LX628	6	28	6	50
AA2LX632	6	32	6	65
AA2LX642	6	42	6	70
AA2LX652	6	52	6	80
AA2LX672	6	72	6	100
AA2LX6522	5	22	6	50
AA2LX6422	4	22	6	50
Material: A type is made of K200 ultra micro tungsten steel, can process plywood, MDF.
MODEL	CED	CEL	SHK	OVL
A2LX3.104	1	4	3.175	40
A2LX3.106	1	6	3.175	40
A2LX3.1.507	1.5	7	3.175	40
A2LX3.1.512	1.5	12	3.175	40
A2LX3.208	2	8	3.175	40
A2LX3.217	2	17	3.175	40
A2LX3.222	2	22	3.175	50
A2LX3.2.512	2.5	12	3.175	40
A2LX3.2.517	2.5	17	3.175	45
A2LX3.2.522	2.5	22	3.175	50
A2LX3.12	3.175	12	3.175	40
A2LX3.17	3.175	17	3.175	40
A2LX3.22	3.175	22	3.175	50
A2LX412	4	12	4	40
A2LX417	4	17	4	40
A2LX422	4	22	4	45
A2LX425	4	25	4	50
A2LX432	4	32	4	60
A2LX442	4	42	4	70
A2LX452	4	52	4	80
A2LX617	6	17	6	50
A2LX622	6	22	6	50
A2LX625	6	25	6	50
A2LX628	6	28	6	55
A2LX632	6	32	6	60
A2LX642	6	42	6	70
A2LX652	6	52	6	80
A2LX672	6	72	6	120
A2LX6522	5	22	6	50
A2LX6422	4	22	6	50
A2LX825	8	25	8	60
A2LX832	8	32	8	70
A2LX842	8	42	8	80
A2LX1025	10	25	10	75
A2LX1035	10	35	10	80
A2LX1045	10	45	10	100
N type is made of K10 hard alloy, suitable for MDF, PVC, acryl.
MODEL	CED	CEL	SHK	OVL
N2LX3.0.803	0.8	3	3.175	40
N2LX3.1.03	1	3	3.175	40
N2LX3.106	1	6	3.175	40
N2LX3.1.206	1.2	6	3.175	40
N2LX3.1.210	1.2	10	3.175	40
N2LX3.1.507	1.5	7	3.175	40
N2LX3.1.512	1.5	12	3.175	40
N2LX3.208	2	8	3.175	40
N2LX3.212	2	12	3.175	40
N2LX3.217	2	17	3.175	42
N2LX3.222	2	22	3.175	50
N2LX3.2.411	2.4	11	3.175	40
N2LX3.2.515	2.5	15	3.175	45
N2LX3.2.522	2.5	22	3.175	50
N2LX3.08	3.175	8	3.175	40
N2LX3.12	3.175	12	3.175	40
N2LX3.15	3.175	15	3.175	40
N2LX3.17	3.175	17	3.175	40
N2LX3.20	3.175	20	3.175	40
N2LX3.22	3.175	22	3.175	42
N2LX3.25	3.175	25	3.175	45
N2LX3.28	3.175	28	3.175	50
N2LX3.32	3.175	32	3.175	60
N2LX3.42	3.175	42	3.175	70
N2LX3.52	3.175	52	3.175	80
N2LX412	4	12	4	40
N2LX417	4	17	4	40
N2LX422	4	22	4	45
N2LX425	4	25	4	50
N2LX428	4	28	4	50
N2LX432	4	32	4	60
N2LX442	4	42	4	70
N2LX452	4	52	4	80
N2LX517	5	17	5	50
N2LX522	5	22	5	50
N2LX6312	3	12	6	50
N2LX6317	3	17	6	50
N2LX6322	3	22	6	50
N2LX6417	4	17	6	50
N2LX6422	4	22	6	50
N2LX6522	5	22	6	50
N2LX612	6	12	6	50
N2LX617	6	17	6	50
N2LX622	6	22	6	50
N2LX625	6	25	6	50
N2LX628	6	28	6	55
N2LX632	6	32	6	60
N2LX642	6	42	6	70
N2LX652	6	52	6	80
N2LX672	6	72	6	100
N2LX6.22	6.35	22	6.35	50
N2LX825	8	25	8	55
N2LX832	8	32	8	70
N2LX842	8	42	8	80
N2LX1025	10	25	10	60
N2LX1035	10	35	10	80
N2LX1045	10	45	10	100
Single flute helix downcut mill
Material: AA type is made of German K55UF ultra-micro tungsten steel, can process PVC, soft wood, plywood, MDF, etc.
MODEL	CED	CEL	柄径SHK	OVL
AA1LXD3.208	2	8	3.175	40
AA1LXD3.10	3.175	10	3.175	40
AA1LXD3.12	3.175	12	3.175	40
AA1LXD3.15	3.175	15	3.175	40
AA1LXD412	4	12	4	50
AA1LXD417	4	17	4	50
AA1LXD422	4	22	4	50
AA1LXD517	5	17	5	50
AA1LXD522	5	22	5	50
AA1LXD617	6	17	6	50
AA1LXD622	6	22	6	55
Material: A type is made of K200 ultra micro tungsten steel, can process plywood, MDF.
MODEL	CED	CEL	SHK	OVL
A1LXD3.208	2	8	3.175	38
A1LXD3.10	3.175	10	3.175	38
A1LXD3.12	3.175	12	3.175	38
A1LXD3.15	3.175	15	3.175	38
A1LXD412	4	12	4	40
A1LXD417	4	17	4	50
A1LXD422	4	22	4	50
A1LXD517	5	17	5	50
A1LXD522	5	22	5	50
A1LXD617	6	17	6	50
A1LXD622	6	22	6	55
A1LXD825	8	25	8	70
A1LXD835	8	35	8	80
A1LXD1035	10	35	10	80
A1LXD1045	10	45	10	100
Single flute mill for aluminum
Material: AA type is made of German K55UF ultra-micro tungsten steel for aluminum alloy.
MODEL	CED	CEL	SHK	OVL
AAL1LX3.1.503	1.5	3.5	3.175	40
AAL1LX3.204	2	4	3.175	40
AAL1LX3.2.504	2.5	4	3.175	40
AAL1LX3.06	3.175	6	3.175	40
AAL1LX408	4	8	4	50
AAL1LX411	4	11	4	50
AAL1LX6510	5	10	6	50
AAL1LX6513	5	13	6	50
AAL1LX612	6	12	6	50
AAL1LX617	6	17	6	50
Material: A type is made of K200 ultra micro tungsten steel.
MODEL	CED	CEL	SHK	OVL
AL1LX3.204	2	4	3.175	38
AL1LX3.2.504	2.5	4	3.175	38
AL1LX3.06	3.175	6	3.175	38
AL1LX408	4	8	4	40
AL1LX410	4	10	4	40
AL1LX6510	5	10	6	40
AL1LX6514	5	14	6	40
AL1LX612	6	12	6	40
AL1LX617	6	17	6	50
AL1LX820	8	20	8	60
AL1LX1025	10	25	10	70
Single flute helix mill
Material: AA type is made of German K55UF ultra-micro tungsten steel for aluminum alloy, can proces acryl, PVC, soft wood, plastics, MDF, etc.
MODEL	CED	CEL	SHK	OVL
AA1LX3.104	1	4	3.175	40
AA1LX3.1.506	1.5	6	3.175	40
AA1LX3.1.512	1.5	12	3.175	40
AA1LX3.205	2	5	3.175	40
AA1LX3.208	2	8	3.175	40
AA1LX3.210	2	10	3.175	40
AA1LX3.212	2	12	3.175	40
AA1LX3.215	2	15	3.175	45
AA1LX3.217	2	17	3.175	45
AA1LX3.222	2	22	3.175	50
AA1LX3.2.510	2.5	10	3.175	40
AA1LX3.2.512	2.5	12	3.175	40
AA1LX3.2.515	2.5	15	3.175	45
AA1LX3.2.517	2.5	17	3.175	45
AA1LX3.2.522	2.5	22	3.175	50
AA1LX3.08	3.175	8	3.175	40
AA1LX3.10	3.175	10	3.175	40
AA1LX3.12	3.175	12	3.175	40
AA1LX3.15	3.175	15	3.175	40
AA1LX3.17	3.175	17	3.175	45
AA1LX3.20	3.175	20	3.175	50
AA1LX3.22	3.175	22	3.175	50
AA1LX3.25	3.175	25	3.175	50
AA1LX3.28	3.175	28	3.175	55
AA1LX3.32	3.175	32	3.175	60
AA1LX3.42	3.175	42	3.175	70
AA1LX3.52	3.175	52	3.175	80
AA1LX412	4	12	4	50
AA1LX415	4	15	4	50
AA1LX417	4	17	4	50
AA1LX422	4	22	4	50
AA1LX425	4	25	4	50
AA1LX428	4	28	4	70
AA1LX432	4	32	4	80
AA1LX442	4	42	4	90
AA1LX452	4	52	4	100
AA1LX517	5	17	5	50
AA1LX522	5	22	5	50
AA1LX617	6	17	6	50
AA1LX622	6	22	6	55
AA1LX625	6	25	6	60
AA1LX628	6	28	6	70
AA1LX632	6	32	6	70
AA1LX642	6	42	6	80
AA1LX652	6	52	6	100
AA1LX672	6	72	6	120
Material: A type is made of K200 ultra micro tungsten steel, and can process PVC, plastics, MDF.
MODEL	CED	CEL	SHK	OVL
A1LX3.104	1	4	3.175	40
A1LX3.1.506	1.5	6	3.175	40
A1LX3.205	2	5	3.175	40
A1LX3.208	2	8	3.175	40
A1LX3.210	2	10	3.175	40
A1LX3.212	2	12	3.175	40
A1LX3.215	2	15	3.175	40
A1LX3.217	2	17	3.175	45
A1LX3.2.510	2.5	10	3.175	40
A1LX3.2.512	2.5	12	3.175	40
A1LX3.2.515	2.5	15	3.175	45
A1LX3.2.517	2.5	17	3.175	45
A1LX3.2.522	2.5	22	3.175	45
A1LX3.08	3.175	8	3.175	40
A1LX3.10	3.175	10	3.175	40
A1LX3.12	3.175	12	3.175	40
A1LX3.15	3.175	15	3.175	40
A1LX3.17	3.175	17	3.175	45
A1LX3.20	3.175	20	3.175	50
A1LX3.22	3.175	22	3.175	50
A1LX3.25	3.175	25	3.175	55
A1LX3.28	3.175	28	3.175	55
A1LX3.32	3.175	32	3.175	60
A1LX3.42	3.175	42	3.175	70
A1LX3.52	3.175	52	3.175	80
A1LX412	4	12	4	40
A1LX415	4	15	4	40
A1LX417	4	17	4	50
A1LX422	4	22	4	50
A1LX425	4	25	4	50
A1LX428	4	28	4	55
A1LX432	4	32	4	60
A1LX442	4	42	4	70
A1LX452	4	52	4	80
A1LX517	5	17	5	50
A1LX522	5	22	5	50
A1LX617	6	17	6	50
MODEL	CED	CEL	SHK	OVL
A1LX622	6	22	6	50
A1LX625	6	25	6	50
A1LX628	6	28	6	55
A1LX632	6	32	6	60
A1LX642	6	42	6	70
A1LX652	6	52	6	80
A1LX672	6	72	6	120
A1LX6312	3	12	6	50
A1LX6417	4	17	6	50
A1LX6522	5	22	6	60
A1LX825	8	25	8	60
A1LX835	8	35	8	80
A1LX845	8	45	8	100
A1LX1025	10	25	10	60
A1LX1035	10	35	10	70
A1LX1045	10	45	10	90
A1LX1055	10	55	10	100
A1LX6.17	6.35	17	6.35	50
A1LX6.22	6.35	22	6.35	50
A1LX6.25	6.35	25	6.35	55
A1LX6.32	6.35	32	6.35	70
N type is made of K10 hard alloy, suitable for PVC, MDF. Not suitable for acryl.
MODEL	CED	CEL	SHK	OVL
N1LX3.205	2	5	3.175	40
N1LX3.208	2	8	3.175	40
N1LX3.08	3.175	8	3.175	40
N1LX3.10	3.175	10	3.175	40
N1LX3.12	3.175	12	3.175	40
N1LX3.15	3.175	15	3.175	40
N1LX3.17	3.175	17	3.175	40
N1LX3.22	3.175	22	3.175	45
N1LX3.25	3.175	25	3.175	50
N1LX3.28	3.175	28	3.175	55
N1LX3.32	3.175	32	3.175	60
N1LX412	4	12	4	40
N1LX417	4	17	4	40
N1LX422	4	22	4	45
N1LX425	4	25	4	50
N1LX428	4	28	4	55
N1LX432	4	32	4	60
N1LX442	4	42	4	70
N1LX452	4	52	4	80
N1LX617	6	17	6	45
N1LX622	6	22	6	45
N1LX625	6	25	6	50
N1LX628	6	28	6	55
N1LX632	6	32	6	60
N1LX642	6	42	6	70
N1LX652	6	52	6	80
N1LX672	6	72	6	100
Composite engraving router bits
Material: AA type is made of German K55UF ultra-micro tungsten steel for aluminum alloy, can proces liquid cristal panel, acryl, etc.
MODEL	CED	CEL	SHK	OVL
AAZHX6103	1	0.3	6	40
AAZHX6104	1	0.4	6	40
AAZHX6105	1	0.5	6	40
AAZHX6106	1	0.6	6	40
AAZHX6107	1	0.7	6	40
AAZHX6108	1	0.8	6	40
AAZHX6109	1	0.9	6	40
AAZHX6110	1	1	6	40
AAZHX61.204	1.2	0.4	6	40
AAZHX61.205	1.2	0.5	6	40
AAZHX61.206	1.2	0.6	6	40
AAZHX61.207	1.2	0.7	6	40
AAZHX61.208	1.2	0.8	6	40
AAZHX61.209	1.2	0.9	6	40
AAZHX61.210	1.2	1	6	40
AAZHX61.211	1.2	1.1	6	40
AAZHX61.212	1.2	1.2	6	40
AAZHX61.213	1.2	1.3	6	40
AAZHX61.214	1.2	1.4	6	40
AAZHX61.215	1.2	1.5	6	40
AAZHX61.505	1.5	0.5	6	40
AAZHX61.506	1.5	0.6	6	40
AAZHX61.507	1.5	0.7	6	40
AAZHX61.508	1.5	0.8	6	40
AAZHX61.509	1.5	0.9	6	40
AAZHX61.510	1.5	1	6	40
AAZHX61.511	1.5	1.1	6	40
AAZHX61.512	1.5	1.2	6	40
AAZHX61.513	1.5	1.3	6	40
AAZHX61.514	1.5	1.4	6	40
AAZHX61.515	1.5	1.5	6	40
AAZHX6205	2	0.5	6	40
AAZHX6207	2	0.7	6	40
AAZHX6208	2	0.8	6	40
AAZHX6209	2	0.9	6	40
AAZHX6210	2	1	6	40
AAZHX6211	2	1.1	6	40
AAZHX6212	2	1.2	6	40
AAZHX6215	2	1.5	6	40
AAZHX6218	2	1.8	6	40
AAZHX6220	2	2	6	40
Material: A type is made of K200 ultra micro tungsten steel, and can process liquid crystal panel and acryl.
MODEL	CED	CEL	SHK	OVL
AZHX6103	1	0.3	6	40
AZHX6104	1	0.4	6	40
AZHX6105	1	0.5	6	40
AZHX6106	1	0.6	6	40
AZHX6107	1	0.7	6	40
AZHX6108	1	0.8	6	40
AZHX6109	1	0.9	6	40
AZHX6110	1	1	6	40
AZHX61.204	1.2	0.4	6	40
AZHX61.205	1.2	0.5	6	40
AZHX61.206	1.2	0.6	6	40
AZHX61.207	1.2	0.7	6	40
AZHX61.208	1.2	0.8	6	40
AZHX61.209	1.2	0.9	6	40
AZHX61.210	1.2	1	6	40
AZHX61.211	1.2	1.1	6	40
AZHX61.212	1.2	1.2	6	40
AZHX61.213	1.2	1.3	6	40
AZHX61.214	1.2	1.4	6	40
AZHX61.215	1.2	1.5	6	40
AZHX61.505	1.5	0.5	6	40
AZHX61.506	1.5	0.6	6	40
AZHX61.507	1.5	0.7	6	40
AZHX61.508	1.5	0.8	6	40
AZHX61.509	1.5	0.9	6	40
AZHX61.510	1.5	1	6	40
AZHX61.511	1.5	1.1	6	40
AZHX61.512	1.5	1.2	6	40
AZHX61.513	1.5	1.3	6	40
AZHX61.514	1.5	1.4	6	40
AZHX61.515	1.5	1.5	6	40
AZHX6205	2	0.5	6	40
AZHX6207	2	0.7	6	40
AZHX6208	2	0.8	6	40
AZHX6209	2	0.9	6	40
AZHX6210	2	1	6	40
AZHX6211	2	1.1	6	40
AZHX6212	2	1.2	6	40
AZHX6215	2	1.5	6	40
AZHX6218	2	1.8	6	40
AZHX6220	2	2	6	40
Single flute straight mill
Material: AA type is made of German K55UF ultra-micro tungsten steel for aluminum alloy, and can process acryl, MDF, two color board, ABS, etc.
MODEL	CED	CEL	SHK	OVL
AA0ZX3.0.603	0.6	3	3.175	40
AA0ZX3.0.803	0.8	3	3.175	40
AA0ZX3.103	1	3	3.175	40
AA0ZX3.105	1	5	3.175	40
AA0ZX3.1.204	1.2	4	3.175	40
AA0ZX3.1.206	1.2	6	3.175	40
AA0ZX3.1.505	1.5	5	3.175	40
AA0ZX3.1.508	1.5	8	3.175	40
AA0ZX3.206	2	6	3.175	40
AA0ZX3.210	2	10	3.175	40
AA0ZX3.2.508	2.5	8	3.175	40
AA0ZX3.2.512	2.5	12	3.175	40
AA0ZX3.10	3	10	3.175	40
AA0ZX3.15	3	15	3.175	40
AA0ZX412	4	12	4	50
AA0ZX415	4	15	4	50
AA0ZX6515	5	15	6	50
AA0ZX6517	5	17	6	50
AA0ZX615	6	15	6	50
AA0ZX617	6	17	6	50
AA0ZX622	6	22	6	50
Material: A type is made of K200 ultra micro tungsten steel.
MODEL	CED	CEL	SHK	OVL
A0ZX3.103	1	3	3.175	38
A0ZX3.1.204	1.2	4	3.175	38
A0ZX3.1.206	1.2	6	3.175	38
A0ZX3.1.505	1.5	5	3.175	38
A0ZX3.1.508	1.5	8	3.175	38
AA0ZX3.206	2	6	3.175	38
A0ZX3.210	2	10	3.175	38
A0ZX3.2.508	2.5	8	3.175	38
A0ZX3.2.512	2.5	12	3.175	38
A0ZX3.10	3	10	3.175	38
A0ZX3.15	3	15	3.175	38
A0ZX412	4	12	4	40
A0ZX415	4	15	4	40
A0ZX6515	5	15	6	45
A0ZX6517	5	17	6	45
A0ZX615	6	15	6	45
A0ZX617	6	17	6	45
A0ZX622	6	22	6	45
N type is made of K10 hard alloy.
MODEL	CED	CEL	SHK	OVL
N0ZX3.103	1	3	3.175	33
N0ZX3.1.204	1.2	4	3.175	33
N0ZX3.1.206	1.2	6	3.175	33
N0ZX3.1.505	1.5	5	3.175	33
N0ZX3.1.508	1.5	8	3.175	33
N0ZX3.206	2	6	3.175	33
N0ZX3.210	2	10	3.175	33
N0ZX3.2.508	2.5	8	3.175	33
N0ZX3.2.512	2.5	12	3.175	33
N0ZX3.10	3	10	3.175	33
N0ZX3.12	3	12	3.175	33
N0ZX3.15	3	15	3.175	33
Round bottom engraving bits
Material: AA type is made of German K55UF ultra-micro tungsten steel for aluminum alloy, and can process acryl, MDF, hard wood, aluminum, etc. Suitable for precise 3D engraving.
MODEL	2R	CEL	2A	SHK	OVL
AAYDJ3.1004	0.4	16	10	3.175	40
AAYDJ3.1006	0.6	14.5	10	3.175	40
AAYDJ3.1008	0.8	13.5	10	3.175	40
AAYDJ3.1010	1	12.5	10	3.175	40
AAYDJ3.1015	1.5	9.5	10	3.175	40
AAYDJ3.1505	0.5	10	15	3.175	40
AAYDJ3.1510	1	8	15	3.175	40
AAYDJ3.2005	0.5	7.5	20	3.175	40
AAYDJ3.2010	1	6	20	3.175	40
AAYDJ41505	0.5	13.2	15	4	40
AAYDJ41510	1	11.2	15	4	50
AAYDJ41515	1.5	8	15	4	50
AAYDJ41520	2	6	15	4	50
AAYDJ42005	0.5	13.2	20	4	50
AAYDJ42010	1	11.2	20	4	50
AAYDJ42015	1.5	8	20	4	50
AAYDJ61505	0.5	20.5	15	6	50
AAYDJ61508	0.8	19.7	15	6	50
AAYDJ61510	1	18.9	15	6	50
AAYDJ61515	1.5	17	15	6	50
AAYDJ61520	2	15	15	6	50
AAYDJ62006	0.6	15	20	6	50
AAYDJ62008	0.8	14.5	20	6	50
AAYDJ62010	1	14	20	6	50
AAYDJ62504	0.4	12.5	25	6	50
AAYDJ62506	0.6	12	25	6	50
AAYDJ62508	0.8	11.7	25	6	50
AAYDJ62510	1	11	25	6	50
AAYDJ63004	0.4	10.4	30	6	50
AAYDJ63006	0.6	10	30	6	50
AAYDJ63008	0.8	9.7	30	6	50
AAYDJ63010	1	9.3	30	6	50
Material: A type is made of K200 ultra micro tungsten steel.
MODEL	2R	CEL	2A	SHK	OVL
AYDJ3.1004	0.4	16	10	3.175	38
AYDJ3.1006	0.6	14.5	10	3.175	38
AYDJ3.1008	0.8	13.5	10	3.175	38
AYDJ3.1010	1	12.5	10	3.175	38
AYDJ3.1015	1.5	9.5	10	3.175	38
AYDJ3.1505	0.5	9.4	15	3.175	38
AYDJ3.1510	1	8.3	15	3.175	38
AYDJ3.2010	1	6.2	20	3.175	38
AYDJ41505	0.5	13.2	15	4	40
AYDJ41510	1	11.2	15	4	40
AYDJ41515	1.5	9	15	4	40
AYDJ41520	2	7	15	4	40
AYDJ42005	0.5	10	20	4	40
AYDJ42010	1	8.5	20	4	40
AYDJ42015	1.5	7.5	20	4	40
AYDJ42505	0.5	7	25	4	40
AYDJ42510	1	6	25	4	40
AYDJ61505	0.5	20.5	15	6	45
AYDJ61508	0.8	19.7	15	6	45
AYDJ61510	1	18.9	15	6	45
AYDJ61515	1.5	17	15	6	45
AYDJ61520	2	15	15	6	45
AYDJ62006	0.6	15	20	6	45
AYDJ62008	0.8	14.5	20	6	45
AYDJ62010	1	14	20	6	45
AYDJ62504	0.4	12.5	25	6	45
AYDJ62506	0.6	12	25	6	45
AYDJ62508	0.8	11.7	25	6	45
AYDJ62510	1	11	25	6	45
AYDJ63004	0.4	10.4	30	6	45
AYDJ63006	0.6	10	30	6	45
AYDJ63008	0.8	9.7	30	6	45
AYDJ63010	1	9.3	30	6	45
3D Engraving Bits
N type is made of K10 hard alloy with two flute. The best 3D bits in China.
MODEL	CED	A	T	SHK
NV3.645	6	45*	0.2	3.175
NV3.660	6	60*	0.2	3.175
NV3.690	6	90*	0.2	3.175
NV3.845	8	45*	0.2	3.175
NV3.890	8	90*	0.2	3.175
NV3.8120	8	120*	0.2	3.175
NV3.8150	8	150*	0.2	3.175
NV61045	10	45*	0.2	6
NV61060	10	60*	0.2	6
NV61090	10	90*	0.2	6
NV610120	10	120*	0.2	6
NV610150	10	150*	0.2	6
NV61660	16	60*	0.2	6
NV61690	16	90*	0.2	6
NV616120	16	120*	0.2	6
NV62260	22	60*	0.2	6
NV62290	22	90*	0.2	6
NV622120	22	120*	0.2	6
NV622135	22	135*	0.2	6
NV622150	22	150*	0.2	6
NV63260	32	60*	0.2	6
NV63290	32	90*	0.2	6
NV632110	32	110*	0.2	6
NV632120	32	120*	0.2	6
NV632130	32	130*	0.2	6
NV632135	32	135*	0.2	6
NV632140	32	140*	0.2	6
NV632150	32	150*	0.2	6
NV103290	32	90*	0.2	10
NV1032120	32	120*	0.2	10
NV12.3290	32	90*	0.2	12.7
NV12.32120	32	120*	0.2	12.7
NV12.4590	45	90*	0.2	12.7
NV12.45120	45	120*	0.2	12.7
Three edge bits
Material: AA type is made of German K55UF ultra-micro tungsten steel for aluminum alloy, and can process iron, steel, brass, aluminum, hard wood, marble, etc.
MODEL	T	A	SHK	OVL
AA3J3.2001	0.1	20	3.175	40
AA3J3.2501	0.1	25	3.175	40
AA3J3.3001	0.1	30	3.175	40
AA3J3.4001	0.1	40	3.175	40
AA3J3.4501	0.1	45	3.175	40
AA3J3.6001	0.1	60	3.175	40
AA3J43001	0.1	30	4	50
AA3J44001	0.1	40	4	50
AA3J44501	0.1	45	4	50
AA3J46001	0.1	60	4	50
AA3J63001	0.1	30	6	50
AA3J64501	0.1	45	6	50
AA3J66001	0.1	60	6	50
AA3J67001	0.1	70	6	50
AA3J69001	0.1	90	6	50
Material: A type is made of K200 ultra micro tungsten steel, and can process iron, steel, brass, aluminum, hard wood, marble, etc.
MODEL	T	A	SHK	OVL
A3J3.2001	0.1	20	3.175	38
A3J3.2501	0.1	25	3.175	38
A3J3.3001	0.1	30	3.175	38
A3J3.4001	0.1	40	3.175	38
A3J3.4501	0.1	45	3.175	38
A3J3.6001	0.1	60	3.175	38
A3J43001	0.1	30	4	40
A3J44001	0.1	40	4	40
A3J44501	0.1	45	4	40
A3J46001	0.1	60	4	40
A3J63001	0.1	30	6	45
A3J64501	0.1	45	6	45
A3J66001	0.1	60	6	45
A3J67001	0.1	70	6	45
A3J69001	0.1	90	6	45
Two flute straight bits
Material: AA type is made of German K55UF ultra-micro tungsten steel for aluminum alloy, and can process iron, steel, brass, aluminum, stainless steel, acryl, hard wood, HDF.
MODEL	T	2A	SHK	OVL
AA2ZJ3.3003	0.3	30	3.175	40
AA2ZJ3.3005	0.5	30	3.175	40
AA2ZJ3.4503	0.3	45	3.175	40
AA2ZJ3.4505	0.5	45	3.175	40
AA2ZJ43005	0.5	30	4	50
AA2ZJ43010	1	30	4	50
AA2ZJ44505	0.5	45	4	50
AA2ZJ44510	1	45	4	50
AA2ZJ46003	0.3	60	4	50
AA2ZJ46005	0.5	60	4	50
AA2ZJ46010	1	60	4	50
AA2ZJ64505	0.5	45	6	50
AA2ZJ64510	1	45	6	50
AA2ZJ64515	1.5	45	6	50
AA2ZJ64520	2	45	6	50
AA2ZJ64530	3	45	6	50
AA2ZJ66002	0.2	60	6	50
AA2ZJ66005	0.5	60	6	50
AA2ZJ66010	1	60	6	50
AA2ZJ66015	1.5	60	6	50
AA2ZJ66020	2	60	6	50
AA2ZJ69002	0.2	90	6	50
AA2ZJ69005	0.5	90	6	50
AA2ZJ69010	1	90	6	50
AA2ZJ69020	2	90	6	50
Material: A type is made of K200 ultra micro tungsten steel, and can process iron, steel, brass, aluminum, hard wood, marble, etc.
MODEL	T	2A	SHK	OVL
A2ZJ43005	0.5	30	4	40
A2ZJ43010	1	30	4	40
A2ZJ44505	0.5	45	4	40
A2ZJ44510	1	45	4	40
A2ZJ46003	0.3	60	4	40
A2ZJ46005	0.5	60	4	40
A2ZJ46010	1	60	4	40
A2ZJ64505	0.5	45	6	45
A2ZJ64510	1	45	6	45
A2ZJ64515	1.5	45	6	45
A2ZJ64520	2	45	6	45
A2ZJ64530	3	45	6	45
A2ZJ66002	0.2	60	6	45
A2ZJ66005	0.5	60	6	45
A2ZJ66010	1	60	6	45
A2ZJ66015	1.5	60	6	45
A2ZJ66020	2	60	6	45
A2ZJ69002	0.2	90	6	45
A2ZJ69005	0.5	90	6	45
A2ZJ69010	1	90	6	45
A2ZJ69020	2	90	6	45
Single flute straight bits
Material: AA type is made of German K55UF ultra-micro tungsten steel for aluminum alloy, and can process  brass, aluminum, stainless steel, acryl, hard wood, HDF.
MODEL	T	2A	SHK	OVL
AA1ZJ3.2502	0.2	25	3.175	40
AA1ZJ3.2503	0.3	25	3.175	40
AA1ZJ3.3002	0.2	30	3.175	40
AA1ZJ3.3003	0.3	30	3.175	40
AA1ZJ3.3004	0.4	30	3.175	40
AA1ZJ3.4002	0.2	40	3.175	40
AA1ZJ3.4003	0.3	40	3.175	40
AA1ZJ3.4004	0.4	40	3.175	40
AA1ZJ43002	0.2	30	4	50
AA1ZJ43003	0.3	30	4	50
AA1ZJ43004	0.4	30	4	50
AA1ZJ44002	0.2	40	4	50
AA1ZJ44005	0.5	40	4	50
AA1ZJ45002	0.2	45	4	50
AA1ZJ44505	0.5	45	4	50
AA1ZJ46002	0.2	60	4	50
AA1ZJ64003	0.3	40	6	50
AA1ZJ64004	0.4	40	6	50
AA1ZJ64005	0.5	40	6	50
AA1ZJ65003	0.3	50	6	50
AA1ZJ65004	0.4	50	6	50
AA1ZJ65005	0.5	50	6	50
AA1ZJ66003	0.3	60	6	50
AA1ZJ69002	0.2	90	6	50
Material: A type is made of K200 ultra micro tungsten steel, and can process aluminum, brass, stainless steel, acryl, hard wood, HDF.
MODEL	T	2A	SHK	OVL
A1ZJ43002	0.2	30	4	40
A1ZJ43003	0.3	30	4	40
A1ZJ43004	0.4	30	4	40
A1ZJ44002	0.2	40	4	40
A1ZJ44005	0.5	40	4	40
A1ZJ44502	0.2	45	4	40
A1ZJ44505	0.5	45	4	40
A1ZJ46002	0.2	60	4	40
A1ZJ64003	0.3	40	6	45
A1ZJ64004	0.4	40	6	45
A1ZJ64005	0.5	40	6	45
A1ZJ65003	0.3	50	6	45
A1ZJ65004	0.4	50	6	45
A1ZJ65005	0.5	50	6	45
A1ZJ66003	0.3	60	6	45
A1ZJ69002	0.2	90	6	45
Flat bottom bits
Material: AA type is made of German K55UF ultra-micro tungsten steel, and can process acryl, two color board, MDF, etc.
MODEL	2T	2A	SHK	OVL
AAJ3.1001	0.1	10	3.175	40
AAJ3.1501	0.1	15	3.175	40
AAJ3.1502	0.2	15	3.175	40
AAJ3.2001	0.1	20	3.175	40
AAJ3.2002	0.2	20	3.175	40
AAJ3.2003	0.3	20	3.175	40
AAJ3.2004	0.4	20	3.175	40
AAJ3.2005	0.5	20	3.175	40
AAJ3.2008	0.8	20	3.175	40
AAJ3.2010	1	20	3.175	40
AAJ3.2501	0.1	25	3.175	40
AAJ3.2502	0.2	25	3.175	40
AAJ3.2503	0.3	25	3.175	40
AAJ3.2504	0.4	25	3.175	40
AAJ3.2505	0.5	25	3.175	40
AAJ3.3001	0.1	30	3.175	40
AAJ3.3002	0.2	30	3.175	40
AAJ3.3003	0.3	30	3.175	40
AAJ3.3005	0.5	30	3.175	40
AAJ3.3008	0.8	30	3.175	40
AAJ3.3010	1	30	3.175	40
AAJ42001	0.1	20	4	50
AAJ42002	0.2	20	4	50
AAJ42003	0.3	20	4	50
AAJ43001	0.1	30	4	50
AAJ43002	0.2	30	4	50
AAJ43003	0.3	30	4	50
AAJ43004	0.4	30	4	50
AAJ44502	0.2	45	4	50
AAJ44505	0.5	45	4	50
AAJ46002	0.2	60	4	50
AAJ46005	0.5	60	4	50
AAJ49002	0.2	90	4	50
AAJ63002	0.2	30	6	50
AAJ64502	0.2	45	6	50
AAJ64505	0.5	45	6	50
AAJ66002	0.2	60	6	50
AAJ66005	0.5	60	6	50
AAJ69002	0.2	90	6	50
Material: A type is made of K200 ultra micro tungsten steel, and can process acryl, two color board, MDF, etc.
MODEL	2T	2A	SHK	OVL
AJ3.1001	0.1	10	3.175	38.5
AJ3.1501	0.1	15	3.175	38.5
AJ3.1502	0.2	15	3.175	38.5
AJ3.2001	0.1	20	3.175	38.5
AJ3.2002	0.2	20	3.175	38.5
AJ3.2003	0.3	20	3.175	38.5
AJ3.2004	0.4	20	3.175	38.5
AJ3.2005	0.5	20	3.175	38.5
AJ3.2008	0.8	20	3.175	38.5
AJ3.2010	1	20	3.175	38.5
AJ3.2501	0.1	25	3.175	38.5
AJ3.2502	0.2	25	3.175	38.5
AJ3.2503	0.3	25	3.175	38.5
AJ3.2504	0.4	25	3.175	38.5
AJ3.2505	0.5	25	3.175	38.5
AJ3.3001	0.1	30	3.175	38.5
AJ3.3002	0.2	30	3.175	38.5
AJ3.3003	0.3	30	3.175	38.5
AJ3.3005	0.5	30	3.175	38.5
AJ3.3008	0.8	30	3.175	38.5
AJ3.3010	1	30	3.175	38.5
AJ42001	0.1	20	4	40
AJ42002	0.2	20	4	40
AJ42003	0.3	20	4	40
AJ43001	0.1	30	4	40
AJ43002	0.2	30	4	40
AJ43003	0.3	30	4	40
AJ44502	0.2	45	4	40
AJ44505	0.5	45	4	40
AJ46002	0.2	60	4	40
AJ46005	0.5	60	4	40
AJ49002	0.2	90	4	40
AJ63002	0.2	30	6	45
AJ64502	0.2	45	6	45
AJ64505	0.5	45	6	45
AJ66002	0.2	60	6	45
AJ66005	0.5	60	6	45
AJ69002	0.2	90	6	45
N type is made of K10 hard alloy. Suitable for acryl, two color boards, MDF, etc.
MODEL	2T	2A	SHK	OVL
NJ3.0502	0.2	5	3.175	33
NJ3.0802	0.2	8	3.175	33
NJ3.1001	0.1	10	3.175	33
NJ3.1002	0.2	10	3.175	33
NJ3.1003	0.3	10	3.175	33
NJ3.1501	0.1	15	3.175	33
NJ3.1502	0.2	15	3.175	33
NJ3.1503	0.3	15	3.175	33
NJ3.1505	0.5	15	3.175	33
NJ3.1508	0.8	15	3.175	33
NJ3.1510	1	15	3.175	33
NJ3.2001	0.1	20	3.175	33
NJ3.2002	0.2	20	3.175	33
NJ3.2003	0.3	20	3.175	33
NJ3.2004	0.4	20	3.175	33
NJ3.2005	0.5	20	3.175	33
NJ3.2008	0.8	20	3.175	33
NJ3.2010	1	20	3.175	33
NJ3.2501	0.1	25	3.175	33
NJ3.2502	0.2	25	3.175	33
NJ3.2503	0.3	25	3.175	33
NJ3.3001	0.1	30	3.175	33
NJ3.3002	0.2	30	3.175	33
NJ3.3003	0.3	30	3.175	33
NJ3.3004	0.4	30	3.175	33
NJ3.3005	0.5	30	3.175	33
NJ3.3006	0.6	30	3.175	33
NJ3.3008	0.8	30	3.175	33
NJ3.3010	1	30	3.175	33
NJ3.3012	1.2	30	3.175	33
NJ3.3015	1.5	30	3.175	33
NJ3.3020	2	30	3.175	33
NJ3.4001	0.1	40	3.175	33
NJ3.4002	0.2	40	3.175	33
NJ3.4003	0.3	40	3.175	33
NJ3.4501	0.1	45	3.175	33
NJ3.4502	0.2	45	3.175	33
NJ3.4503	0.3	45	3.175	33
NJ3.4505	0.5	45	3.175	33
NJ3.6002	0.2	60	3.175	33
NJ3.6003	0.3	60	3.175	33
NJ3.6005	0.5	60	3.175	33
NJ3.9002	0.2	90	3.175	33
NJ3.9003	0.3	90	3.175	33
NJ42001	0.1	20	4	40
NJ42002	0.2	20	4	40
NJ42501	0.1	25	4	40
NJ42502	0.2	25	4	40
NJ42503	0.3	25	4	40
NJ42504	0.4	25	4	40
NJ43001	0.1	30	4	40
NJ43002	0.2	30	4	40
NJ43003	0.3	30	4	40
NJ43004	0.4	30	4	40
NJ44502	0.2	45	4	40
NJ44503	0.3	45	4	40
NJ61502	0.2	15	6	40
NJ62002	0.2	20	6	40
NJ62502	0.2	25	6	40
NJ63002	0.2	30	6	40
NJ64002	0.2	40	6	40
NJ64003	0.3	40	6	40
NJ64502	0.2	45	6	40
NJ64505	0.5	45	6	40
NJ66002	0.2	60	6	40
NJ66005	0.5	60	6	40
NJ66010	1	60	6	40
NJ66015	1.5	60	6	40
NJ66020	2	60	6	40
NJ69002	0.2	90	6	40
NJ69005	0.5	90	6	40
NJ612002	0.2	120	6	40
All tungsten steel 3D bits
Material: A type is made of K200 ultra micro tungsten steel, and can process acryl, two color board, MDF, etc.
MODEL	CED	ANGLE-2A	TIP SIZE	SHK
AV3.645	6	45	0.2	3.175
AV3.660	6	60	0.2	3.175
AV3.690	6	90	0.2	3.175
AV3.845	8	45	0.2	3.175
AV3.860	8	60	0.2	3.175
AV3.890	8	90	0.2	3.175
AV3.8120	8	120	0.2	3.175
AV3.8150	8	150	0.2	3.175
AV61045	10	45	0.2	6
AV61060	10	60	0.2	6
AV61090	10	90	0.2	6
AV610120	10	120	0.2	6
AV610150	10	150	0.2	6
AV61260	12	60	0.2	6
AV61290	12	90	0.2	6
AV612120	12	120	0.2	6
AV612150	12	150	0.2	6
AV61660	16	60	0.2	6
AV61690	16	90	0.2	6
AV616120	16	120	0.2	6
AV82060	20	60	0.2	8
AV82090	20	90	0.2	8
AV820120	20	120	0.2	8